{"title":"Best Sellers","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eTop-rated tools chosen by expert woodworkers - these are the best-selling products our customers consistently rate highest. Trusted across workshops in the UK and beyond, each tool here has earned its place through five-star reviews, repeat purchases, and proven performance. Built for precision, reliability, and lasting value, these are the tools serious woodworkers rely on.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"auktools-professional-router-table-top-and-fence","title":"AUKTools Professional Router Table Top and Fence","description":"\u003cp\u003eOur AUKTools Router Table and Fence Package features a HPL (High-Pressure Laminate) table top, made for us in the UK to our exacting standards. The low friction, hard-wearing phenolic laminated surface and balancer are bonded to a green moisture resistant MDF core, renowned for its stability and longevity in damp conditions. Set into the table top is a 3\/4\" wide (19mm) aluminium mitre track red anodised for a hard-wearing low friction glide for accessories such as feather boards or a mitre gauge.\u003c\/p\u003e \u003cp\u003eThe 27mm top is lipped around with 2mm thick impact-resistant black PVC banding and the top is laser etched with mm markings for accurate fence positioning. The fence adjusting slots are CNC machined through the table top and lined underneath with a 2mm thick phenolic lozenge-shaped washer for easy adjusting of a fence and prevent wear of the MDF. A 2mm thick phenolic insert pad lines the bottom of the 235mm x 298mm rebate providing a flat and durable base for your router plate levelling screws. The CNC routed aperture accepts any of our JessEm or INCRA router plates or lifts.\u003c\/p\u003e \u003cp\u003eOur AUKTools Router Fence has many of the same features as other larger fences but is designed for more compact workshops or site work, where its small size comes into its own. The single-piece aluminium section is strong and robust and has t-slots in both the top and face of the fence for use with accessories such as fence stops, feather boards or JessEm Clear Cut Stock Guides. The 65mm (2-1\/2”) dust port provides excellent above the table dust extraction. The clear plastic bit guard and phenolic faced sliding fence pieces are easily adjusted to ensure maximum user safety whilst allowing for various sized cutters.\u003c\/p\u003e \u003cp\u003eThe fences can not only slide to change the cutter aperture but also be moved forward by 0.8 or 1.6mm for jointing using the included fence offset bars which neatly store within the red anodised extrusion. The fence is fixed down to your table top using the two supplied high bolts which are secured through the router fence, no extra sidebars are required, making a truly small but perfectly formed compact router fence.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734020800885,"sku":"AUKSRT800RFE","price":389.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/e53f5ce8-e886-47b9-a5b3-c203d814d27b.jpg?v=1754389444"},{"product_id":"ashley-iles-mkii-bevel-edged-chisels-set-of-4-with-tool-roll","title":"Ashley Iles MkII Bevel Edged Chisels - Set of 4 with Tool Roll","description":"\u003cp\u003eAshley Iles MkII Bevel Edged Chisels - Set of 4 with Tool Roll supplied with the four most commonly used sizes: 6mm, 12mm, 19mm and the all important 25mm. Also available as a Set of 6 or Set of 8. \u003c\/p\u003e \u003cp\u003eAshley Iles MK2 Bevel Edge Chisels are one of our biggest sellers and Peter Sefton's chisel of choice for pure quality and value for money. They are made from O1 steel and are ground to have very fine lands on the sides; they're great for general bench work and dovetailing.\u003c\/p\u003e \u003cp\u003eThey are made from high carbon O1 steel and are ground to have very fine lands (edges) on the sides; they're great for general bench work and dovetailing.  The fine hand-ground blades are beautifully made in England with very comfortable turned Padauk handles set onto the tangs with brass ferrules.\u003c\/p\u003e \u003cp\u003eThe handles are individually sized getting bigger with the larger blades to give great balance and pose. The backs are ground with a slight concave surface to make initial blade polishing a very quick process and are easy to maintain as quality cabinetmaker's chisels.\u003c\/p\u003e \u003cp\u003eGreat for both paring and general mallet bench work they come with a life-time warranty from us backed by the Ashley Iles family-run business.  \u003c\/p\u003e \u003cp\u003eThe accurately heat treated oil quenched blades are produced and tested to RC60-61 from tip to shoulder to ensure a life long quality hard working steel that holds the keenest of edges whilst being quick to sharpen and maintain.\u003c\/p\u003e \u003cp\u003eThese truly beautiful hand made chisels are the choice of professional furniture makers and keen woodworkers looking for excellent value for money and quality.\u003c\/p\u003e","brand":"Ashley Iles","offers":[{"title":"Default Title","offer_id":55734043869557,"sku":"AILCHIBEVS4TR","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/18184233-94bc-4c10-b747-ab2d4875b91c.jpg?v=1754391011"},{"product_id":"ashley-iles-mkii-bevel-edged-chisels-set-of-6-with-tool-roll","title":"Ashley Iles MkII Bevel Edged Chisels - Set of 6 with Tool Roll","description":"\u003cp\u003eAshley Iles MK2 Bevel Edged Chisels Set of 6 is our most popular set of chisels; they are Peter Sefton's chisel of choice for pure quality and value for money and used within our own Furniture School's tool kits.\u003c\/p\u003e \u003cp\u003eThe standard Ashley Iles Set of 6 comes in 3, 6, 9, 12, 15 and 19mm - however, Wood Workers Workshop have choosen a slightly different spec as Peter feels that the 15mm is rarely used whereas the 25mm is the most commonly used chisel in the workshop.\u003c\/p\u003e \u003cp\u003eThey are made from high carbon O1 steel and are ground to have very fine lands (edges) on the sides; they're great for general bench work and dovetailing.  The fine hand-ground blades are beautifully made in England with very comfortable turned hardwood handles set onto the tangs with brass ferrules.\u003c\/p\u003e \u003cp\u003eThe handles are individually sized getting bigger with the larger blades to give great balance and pose. The backs are ground with a slightly concave surface to make initial blade polishing a very quick process and are easy to maintain as quality cabinetmaker's chisels.\u003c\/p\u003e \u003cp\u003eGreat for both paring and general mallet bench work they come with a life-time warranty from us backed by the Ashley Iles family-run business.\u003c\/p\u003e \u003cp\u003eThe accurately heat treated oil quenched blades are produced and tested to RC60-61 from tip to shoulder to ensure a life long quality hard working steel that holds the keenest of edges whilst being quick to sharpen and maintain.\u003c\/p\u003e \u003cp\u003eThese truly beautiful hand made chisels are the choice of professional furniture makers and keen woodworkers looking for excellent value for money and quality.\u003c\/p\u003e","brand":"Ashley Iles","offers":[{"title":"Default Title","offer_id":55734043935093,"sku":"AILCHIBEVS6","price":255.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/fef628ff-d1ec-4b52-915a-1a6633310011.jpg?v=1754391011"},{"product_id":"auktools-anti-slip-mat","title":"AUKTools Anti-Slip Mat","description":"\u003cp\u003eThe AUKTools Anti-Slip Mat is great for preventing work from slipping on the bench. The rubber-like mat grabs onto your bench top and hold small parts while you work on them. The large area allows the mat to be used as a general purpose cover to protect the benchtop and its thin, open waffle design is perfect for sanding or routing, preventing the dust building up around the work. At 1220mm X 610mm it covers a substantial bench top area but it is easy to cut to size for use as smaller non-slip mats if required.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1220mm x 610mm (48\" x 24\")\u003c\/li\u003e \u003cli\u003eAnti-Slip Matting\u003c\/li\u003e \u003cli\u003eClean the mat with mild soap and water and leave to dry naturally\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734044066165,"sku":"AUKASM","price":13.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/9c6a9b5b-9bc9-4b0d-bf81-8d66d5808364.jpg?v=1754391016"},{"product_id":"auktools-automatic-centre-punch","title":"AUKTools Automatic Centre Punch","description":"\u003cp\u003eThe AUKTools Automatic Centre Punch comes with an all brass handle and an S2 Steel point that automatically strikes a blow when downward pressure is applied. The internal spring mechanism makes consistent and uniform sized marks in timber and metal every time. No hammer is required meaning one hand is always free to hold your work and accurately position the punch.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLength: 125mm \/ 5\"\u003c\/li\u003e \u003cli\u003eEasy Grip Knurled Brass Handle\u003c\/li\u003e \u003cli\u003eSpring loaded action\u003c\/li\u003e \u003cli\u003ePoint Material: S2 Steel\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734044131701,"sku":"AUKCP125","price":6.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/8b79d4d2-28aa-4506-9710-f47385dd325f.jpg?v=1754391018"},{"product_id":"auktools-contour-sanding-grips-set-of-8","title":"AUKTools Contour Sanding Grips (Set of 8)","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFlexible rubber grips allow you to easily sand contours, curves, profiles, and other hard to get at areas. Simply cut you abrasive paper to size and instead of folding it to get that tough spot, wrap it around one of the contoured grips. This package includes 3 contour pads approximately 140mm x 70mm x 12mm, \u003cmeta charset=\"utf-8\"\u003e140mm x 70mm x 6mm and \u003cmeta charset=\"utf-8\"\u003e140mm x 70mm x 5mm, thick. The five grips include one with a wide flat side and four with radius contours. The handles of the contoured grips even have micro profiles for tighter areas such as flat, tight radiuses, knife edges, wedges and more.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSimple and quick sanding every time\u003c\/li\u003e \u003cli\u003e3 large sanding pads in three thicknesses (12mm, 6mm \u0026amp; 5mm)\u003cbr\u003e \u003c\/li\u003e \u003cli\u003e4 radius contour grips (approx. 6mm, 8.3mm, 11.6mm 14.5mm and 1 flat-sided (25mm)\u003c\/li\u003e \u003c\/ul\u003e \u003ch5\u003e\u003c\/h5\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734044197237,"sku":"AUKCSGS8","price":11.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/bfbf3a7b-169e-4718-8ed5-99357afbd476.jpg?v=1754391019"},{"product_id":"auktools-circular-router-inlay-template","title":"AUKTools Circular Router Inlay Template","description":"\u003cp\u003eNo more looking through a large piles of templates for the right sized circle. The AUKTools Circular Router Inlay Template combines 12 common circle sizes and 4 corner radii into one handy template. Each size is clearly labeled for quick identification. The transparent acrylic has fine cross-hairs on each hole making it easy to align the template with your centre marks.\u003c\/p\u003e \u003cp\u003eThese templates can easily be attached to your piece \/ surface using double-sided tape or hold down clamps. There is also space in the template to drill countersunk holes and screw the template to the work-piece.\u003c\/p\u003e \u003cp\u003eThe variety of circle sizes makes this templates ideal for inlays and general tracing for other projects.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCut perfect circles with your router.\u003c\/li\u003e \u003cli\u003e12 different full circle diameters: 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm,70mm, 75mm, 80mm and 85mm\u003c\/li\u003e \u003cli\u003e4 different 1\/4 circle radii: 20mm, 30mm, 40mm and 50mm\u003c\/li\u003e \u003cli\u003eMaterial: 10mm thick Acrylic\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWhen used in combination with our \u003ca title=\"AUKTools Metric Guide Bush Set\" href=\"%%GLOBAL_ShopPathSSL%%\/auktools-metric-threaded-guide-bush-set\/\" target=\"_blank\"\u003eAUKTools Metric Guide Bush Set\u003c\/a\u003e just about any size circle up to 85mm can be routed perfectly.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734044230005,"sku":"AUKCTG1","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/58d136b0-09c3-4fdc-9fae-16a5a8dec938_ee740d1e-3f4d-484d-ba55-9ff90bc20c42.jpg?v=1769674426"},{"product_id":"auktools-3-piece-drill-stop-collar-set","title":"AUKTools 3 Piece Drill Stop Collar Set","description":"\u003cmeta charset=\"utf-8\"\u003e \u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value\" itemprop=\"description\"\u003e \u003cp\u003eThis AUKTools Drill Stop Collar Set allows you to accurately gauge the depth when drilling a hole. Can be used with lip and spur, or twist drill bits. The set consists of 6, 8 and 10mm collars.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"product attribute key-features\"\u003e \u003ch4\u003eFeatures\u003c\/h4\u003e \u003cdiv class=\"value\"\u003e \u003cul\u003e \u003cli class=\"first\"\u003eSteel stop collars to gauge depth when drilling\u003c\/li\u003e \u003cli\u003eSuitable for lip and spur or twist drill bits\u003c\/li\u003e \u003cli class=\"last\"\u003eSet comprises of 6, 8 and 10mm collars\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePlease Note: Image is for illustrative purposes only. Drill bit \u003cstrong\u003eNOT\u003c\/strong\u003e included.\u003c\/span\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734044262773,"sku":"AUKDCS3","price":2.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/9061e512-a44f-496e-a9da-474a215b89d0.jpg?v=1754391020"},{"product_id":"auktools-dust-extraction-hose-63mm-x-1-5m","title":"AUKTools Dust Extraction Hose - 63mm x 1.5m","description":"\u003cp\u003eThis durable AUKTools Dust Extraction Hose is the perfect partner for attaching your router table or machines to a mobile or fixed dust extraction system. This tough but highly flexible hose will bend but not kink, no more guessing where blockages are or needlessly pulling your system apart when you install this see-through hose.\u003c\/p\u003e \u003cp\u003eAvailable in two sizes; the 63mm diameter fits onto our router table fences whilst the 103mm diameter fit INCRA CleanSweep Dust Collection Cabinet or our AUKTools Dust Extraction Control Dual Port Kit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMedium duty Polyurethane hose\u003c\/li\u003e \u003cli\u003eSpring wire helix brace \u003c\/li\u003e \u003cli\u003eHighly flexible\u003c\/li\u003e \u003cli\u003ePermanently kink resistant\u003c\/li\u003e \u003cli\u003eSmallest bending radius\u003c\/li\u003e \u003cli\u003eOptimum flow characteristics\u003c\/li\u003e \u003cli\u003eHighly abrasion-resistant\u003c\/li\u003e \u003cli\u003eHardly inflammable\u003c\/li\u003e \u003cli\u003eDiameter: 63mm\u003c\/li\u003e \u003cli\u003eLength: 1.5m\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734044557685,"sku":"AUKDUSTHOSE6315","price":16.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/d70f58cb-64e9-4748-b5f3-c6b1f78e5fac.jpg?v=1769079106"},{"product_id":"auktools-8mm-er20-collet-for-auktools-routers","title":"AUKTools 8mm ER20 Collet for AUKTools Routers","description":"\u003cp\u003eAUKTools 8mm ER20 Collet for use with the ER20 model of our AUKTools Fixed Base Router which comes supplied with 1\/4\" and 1\/2\" collets and nuts, this is the 8mm collet only. ER20 collets offer increased cutter grip with reduced runout, extending cutter and bearing life. Engineered to auto-release the cutter.\u003c\/p\u003e \u003cp\u003eFor use with Metric 8mm shank router cutters ONLY.\u003c\/p\u003e \u003cp\u003ePlease Note: AUKTools ER20 Collets are not suitable for use with previous models of our AUKTools Fixed Base Router.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734045213045,"sku":"AUK-ERCOL8MM","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/f4ef0413-a5fc-41fd-ad25-6ea94e9e79fa.jpg?v=1754391027"},{"product_id":"auktools-er20-collet-nut-for-auktools-routers","title":"AUKTools ER20 Collet Nut for AUKTools Routers","description":"\u003cp\u003eReplacement AUKTools ER20 Collet Nut for use with the ER20 model of our AUKTools Fixed Base Router.\u003c\/p\u003e \u003cp\u003eFor use with AUKTools ER20 Collets.\u003c\/p\u003e \u003cp\u003ePlease Note: AUKTools ER20 Collet Nut are not suitable for use with previous models of our AUKTools Fixed Base Router.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734045344117,"sku":"AUKFBRER20NUT","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/249999dd-5900-45bc-a765-767b6f19d9c7.jpg?v=1754391031"},{"product_id":"auktools-max-awl","title":"AUKTools Max Awl","description":"\u003cp\u003eAwls make holes, usually to start screws in wood or push thread or lace through leather. The AUKTools Max Awl is an elegant, beautiful interpretation of this age old tool. Approximately 125mm (5\") long with the metal portion making up just about 75mm (3\") in length and tapering from 15mm (5\/8\") to the point, making holes with the Max is fast and easy plus it looks good on standby.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e125mm (5\") total length\u003c\/li\u003e \u003cli\u003eMetal portion 75mm (3\") long, 15mm (5\/8\") diameter tapering to the point\u003c\/li\u003e \u003cli\u003eSharp point makes it wasy to use\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734045540725,"sku":"AUKMAXAWL","price":19.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/4b207919-7216-40fa-888a-c58983e205a1.jpg?v=1754391034"},{"product_id":"auktools-nvr-switch-box-only","title":"AUKTools NVR Switch Box","description":"\u003cp\u003eOur AUKTools industrial quality NVR (No Volt Release) Switch features a magnetic ON\/OFF switch with a prominently positioned emergency stop and isolation button. It can be used as a replacement switch or for remote switching and isolation on a range of power tools including Lathes, Pillar Drills and Dust Extractors. The NVR switch means that if you suffer power loss, your power tool will not restart until you manually switch it back on. The emergency stop button locks on and can only be released when you physically twist to unlock it, allowing you to easily isolate your power tool.\u003c\/p\u003e \u003cp\u003eIt can switch up to 13 amps, 230 volts. It has a No Volt Release feature, but not overload protection. It is not suitable for use with additional safety switches and can only be used to control the power off and on.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUp to 13A switching 230v capacity\u003c\/li\u003e \u003cli\u003eIsolating emergency stop button with twist release\u003c\/li\u003e \u003cli\u003eFour knockouts for wire access and four fixing holes\u003c\/li\u003e \u003cli\u003eDouble Pole NVR Isolator\u003c\/li\u003e \u003cli\u003eSize: 80 x 115 x 85mm\u003c\/li\u003e \u003cli\u003eHigh-level IP 54 rated for protection from dirt, dust and splashing water\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734045868405,"sku":"AUKNVRBOX","price":19.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/683ec8e3-d232-4134-84e0-236fbc6af621.jpg?v=1754391036"},{"product_id":"auktools-precision-triangle-squares","title":"AUKTools Precision Triangle Squares","description":"\u003cp\u003eThese AUKTools Precision Triangle Squares can perform many useful tasks in the workshop, accurately machined from a solid block of aluminium with lightly chamfered edges to protect your workpiece.\u003c\/p\u003e \u003cp\u003eUse as a Speed Square for quickly measuring and marking at 90 and 45 degrees, or use the integrated neodymium magnets for attaching the triangles to your machines to set up your table saw, bandsaw, planer or router fence to 90 or 45 degrees.\u003c\/p\u003e \u003cp\u003eThe indented holes along the side arms work perfectly with our \u003ca title=\"AUKTools Adjustable Fence Clamps\" contenteditable=\"false\" href=\"\/auktools-adjustable-fence-clamp-pair\/\" target=\"_blank\" rel=\"noopener\"\u003eAUKTools Adjustable Fence Clamps\u003c\/a\u003e to accurately clamp 90-degree corners whilst the black anodised finish protects from discolouration and glue staining.\u003c\/p\u003e \u003cp\u003eThe easy to read 80mm white on black laser engraving has metric measurements on one side and imperial measurements on the other, used for setting heights on router cutters, saw blades, drill presses.\u003c\/p\u003e \u003cp\u003eThe set comes with two precision triangles and a pair of steel sub-bases that can be attached to the triangles to use as standard unmagnetised squares.\u003c\/p\u003e \u003cp\u003ePLEASE NOTE: AUKTools Adjustable Fence Clamps are NOT included\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734045999477,"sku":"AUKPSSET","price":32.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/b7e8e2c3-2ebb-4c08-84b2-2c2e16397ff1.jpg?v=1754391037"},{"product_id":"auktools-power-tool-dust-extraction-hose-and-adaptors","title":"AUKTools Power Tool Dust Extraction Hose and Adaptors","description":"\u003cp\u003eWith soft rubber fittings on both ends is the ideal product for connecting up your portable power tools to your shop vacuum. Connects to the ports of almost all power tools such as r\u003cmeta charset=\"utf-8\"\u003eouters, circular saws, sanders, planers, jigsaws, sanders and more.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eKink resistant flexi-hose\u003c\/li\u003e \u003cli\u003eWall material: Soft PVC\u003cbr\u003e \u003c\/li\u003e \u003cli\u003eAdaptor fittings to fit Festool CT Vacuum\u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003e \u003cul\u003e \u003cli\u003e1 x Hose – 3 metres x ID 24mm\u003c\/li\u003e \u003cli\u003e1 x Small Adaptor – OD 30mm (1-3\/16”) – ID 25mm (1”)\u003c\/li\u003e \u003cli\u003e1 x Large Adaptor – OD 46mm (1-3\/4”) ID 38mm (1-1\/2”)\u003c\/li\u003e \u003cli\u003e2 x Reducers – OD 57mm (2-1\/4”) ID 50.8mm (2”) reducing to OD 38mm (1-1\/2”) ID 32mm (1-1\/4”)\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734046032245,"sku":"AUKPTEH","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/85ac8d99-0937-4451-8fd8-e8714eaf3c9b.jpg?v=1769079447"},{"product_id":"auktools-compact-router-fence","title":"AUKTools Compact Router Fence","description":"\u003cp\u003eOur AUKTools Compact Router Fence has many of the same features as other larger fences but is designed for more compact workshops or site work, where its small size comes into its own. The single-piece aluminium section is strong and robust and has t-slots in both the top and face of the fence for use with accessories such as fence stops, feather boards or JessEm Clear Cut Stock Guides. The 65mm (2-1\/2”) dust port provides excellent above the table dust extraction. The clear plastic bit guard and phenolic faced sliding fence pieces are easily adjusted to ensure maximum user safety whilst allowing for various sized cutters.\u003c\/p\u003e \u003cp\u003eThe fences can not only slide to change the cutter aperture but also be moved forward by 0.8 or 1.6mm for jointing using the included fence offset bars which neatly store within the red anodised extrusion. The fence is fixed down to your table top using the two supplied high bolts which are secured through the router fence, no extra sidebars are required, making a truly small but perfectly formed compact router fence.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e600mm length\u003c\/li\u003e \u003cli\u003eTop and front-facing tracks\u003c\/li\u003e \u003cli\u003e65mm (2-1\/2”) dust port\u003c\/li\u003e \u003cli\u003eFixes into router table slots\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734046097781,"sku":"AUKRFE","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/3908a1c1-923e-4183-acf0-5cc5fa9fa753.jpg?v=1754391038"},{"product_id":"auktools-router-fence","title":"AUKTools Professional Router Fence","description":"\u003cp\u003eThe AUKTools Professional Router Fence is one of the most advanced in its price range. It features a dual-track fastening system with adjustable scales that can be set for zero reference allowing for fast, repeatable setup. A scale is also provided along the top of the fence with the zero position at the centre in both metric and imperial measurements. On the front face of the fence, there is a second T-Track to accept either the included Clear Bit Guard or optional extras such as JessEm Clear-Cut Stock Guides or Feather Boards.\u003c\/p\u003e \u003cp\u003eIt is constructed of a single extruded aluminium section with a red anodized finish. The fence glides smoothly in the tracks and locks firmly with the twist of its ‘high-boy’ lock-down knobs. Low-friction strips underneath the fence allow it to glide easily without scratching your table top.\u003c\/p\u003e \u003cp\u003eThe HDF sacrificial sub-fence faces are edge banded to ensure smooth gliding of your workpiece and can be adjusted tool-free with convenient locking knobs on the backside of the fence. The shimming bars are designed to offset the fence face by 0.8mm (1\/32\") or 1.6mm (1\/16\"). When not in use they conveniently store on the backside of the fence.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFence dimensions: 915mm (36”) long x 90mm (3.5”) high\u003c\/li\u003e \u003cli\u003eFully adjustable fence faces with quick locking knobs\u003c\/li\u003e \u003cli\u003eTop and front-facing tracks\u003c\/li\u003e \u003cli\u003eSide-mounted fence tracks with built-in adjustable scales\u003c\/li\u003e \u003cli\u003eTool-free fence adjustments\u003c\/li\u003e \u003cli\u003eDust port dimensions: ID 57mm (2-1\/4\") \/ OD 63mm (2-1\/2\")\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIt fits tables from 600mm (24”) to 810mm (32”) long and 13mm (1\/2”) to 38mm (1-1\/4\") thick\u003c\/li\u003e \u003cli\u003eAUKTools 800 x 600mm Router Table\u003c\/li\u003e \u003cli\u003eJessEm Mast-R-Top Phenolic Router Table Top\u003c\/li\u003e \u003cli\u003eINCRA Table Tops\u003c\/li\u003e \u003cli\u003eHome-made router tables\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003ePlease note: Images showing router table top and lift are for illustrative purposes only.  This product is just the fence highlighted.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734047998325,"sku":"AUKRFNC800","price":219.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/2c89534e-b2de-4603-aadb-5feff4bf05ca.jpg?v=1754391131"},{"product_id":"auktools-7-piece-router-table-setup-bars-metric","title":"AUKTools 7 Piece Router Table Setup Bars (Metric)","description":"\u003cp\u003eWhen setting up your machinery, whether it is your table saw, bandsaw or router table, setting up accurately is paramount. With the AUKTools 7 Piece Router Table Setup Bars each individual bar gives you three gauges in one, a depth gauge, a step gauge and a height gauge.\u003c\/p\u003e \u003cp\u003eThe cut-out on the base of each setup bar can be used for setting your router bits or saw blade to give precise height. The step on the top edge of each bar can be used to test the depth of your completed cuts. The step on the end of each bar can be used to set the distance from the blade or bit to the fence. Each setup bar is made from aluminium with a black anodised finish on the front and rear faces of the bar.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSizes - 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 13mm\u003c\/li\u003e \u003cli\u003eAnodised aluminium faces\u003c\/li\u003e \u003cli\u003e3 in 1 design makes them perfect for many applications\u003c\/li\u003e \u003cli\u003eGreat for routers, router tables, table saws, circular saws, bandsaws\u003c\/li\u003e \u003cli\u003eComes with a protective plastic case\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734048293237,"sku":"AUKSETBARS","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/0bcd334e-a150-4746-95d5-2503652d3e10.jpg?v=1754391131"},{"product_id":"auktools-compact-router-table-top-and-fence","title":"AUKTools Compact Router Table Top and Fence","description":"\u003cp\u003e\u003cstrong\u003eAUKTools Compact Router Table Top\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eOur AUKTools Router Table Tops are faced with HPL (High-Pressure Laminate), made for us in the UK to our exacting standards. \u003c\/span\u003e The low friction, hard-wearing phenolic laminated surface and balancer are bonded to a green moisture resistant MDF core, renowned for its stability and longevity in damp conditions. A 3\/4” wide (19mm) aluminium mitre track is set into the table top red anodised for a hard-wearing low friction glide for accessories such as feather boards or a mitre gauge.\u003c\/p\u003e \u003cp\u003eThe 27mm top is lipped around with 2mm thick impact-resistant black PVC banding and the top is laser etched with mm markings for accurate fence positioning. The fence adjusting slots are CNC machined through the table top and lined underneath with a 2mm thick phenolic lozenge-shaped washer for easy adjusting of a fence and prevent wear of the MDF. A 2mm thick phenolic insert pad lines the bottom of the 235mm x 298mm rebate providing a flat and durable base for your router plate levelling screws. The CNC routed aperture accepts any of our JessEm or INCRA router plates or lifts.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAUKTools Compact Router Fence\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt has many of the same features as other larger fences but is designed for more compact workshops or site work. The single-piece aluminium section is robust and has t-slots in both the top and face of the fence for use with accessories such as fence stops, feather boards or JessEm Clear Cut Stock Guides. The 65mm (2-1\/2”) dust port provides excellent above the table dust extraction. The clear plastic bit guard and phenolic faced sliding fence pieces are easily adjusted to ensure maximum user safety whilst allowing for various sized cutters.\u003c\/p\u003e \u003cp\u003eThe fences can not only slide to change the cutter aperture but also be moved forward by 0.8 or 1.6mm for jointing using the included fence offset bars which neatly store within the red anodised extrusion. The fence is fixed down to your table top using the two supplied high bolts which are secured through the router fence, no extra sidebars are required, making a truly small but perfectly formed compact router fence.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRouter Table Top - H600 x W400 x D27mm\u003c\/li\u003e \u003cli\u003e3\/4” Mitre Track\u003c\/li\u003e \u003cli\u003eTo accept a plate size 235 x 298 x 9.5mm (9-1\/4\" × 11-3\/4\" x 3\/8”)\u003c\/li\u003e \u003cli\u003ePhenolic faced top and bottom\u003c\/li\u003e \u003cli\u003e2mm thick phenolic insert pad\u003c\/li\u003e \u003cli\u003eLaser-etched top with mm fence markings\u003c\/li\u003e \u003cli\u003eRouter Fence - 600mm length\u003c\/li\u003e \u003cli\u003e65mm (2-1\/2”) dust port\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734048489845,"sku":"AUKSRT600RFE","price":219.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/684388ce-5e21-4c0e-8749-e8e8d989bb9f.jpg?v=1754391136"},{"product_id":"auktools-dust-extraction-universal-adaptor-4-to-1","title":"AUKTools Dust Extraction Universal Adaptor - 4\" to 1\"","description":"\u003cmeta charset=\"utf-8\"\u003e \u003cp\u003e\u003cspan\u003eA universal adaptor with 5 different sized steps. Simply cut the section you require with a fine toothed saw. Made from ABS.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eDiameters are 25mm, 50mm, 63mm, 75mm and 100mm (Outside Dimension). \u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734048653685,"sku":"DUSFUNUA41","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/813d2276-1889-480f-bd7d-6a811a4f8b78.jpg?v=1769079113"},{"product_id":"auktools-dust-extraction-blast-gate-2-1-2-od","title":"AUKTools Dust Extraction Blast Gate - 2-1\/2\" OD","description":"\u003cmeta charset=\"utf-8\"\u003e \u003cp\u003eBlast gates improve the effectiveness of your dust extraction setup by allowing the user control of the airflow between a single extractor and multiple machines, ensuring efficiency of the suction.\u003c\/p\u003e \u003cp\u003eThis self-clearing blast gate connects in line with 2-1\/2\" (Outer Dimension) ports on either side and features a unique shaped gate that reduces chip build-up in the blast gate housing.  Perfect for controlling air flow on router table \u003cspan\u003e2-1\/2\" port \u003c\/span\u003efence extraction.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Blast Gate 2 1\/2'' (63.5mm)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Rugged ABS Plastic\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734048719221,"sku":"DUSGATE212","price":3.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/cf271c0e-ad6d-4473-b72c-4a4e41b67f62.jpg?v=1769079114"},{"product_id":"fastcap-10-million-dollar-stick","title":"FastCap 10 Million Dollar Stick","description":"\u003cp\u003eCutting on your mitre saw or chop saw just got safer with the FastCap 10 Million Dollar Stick. Designed to keep your hands away from the blade and out of harm’s way, this injection moulded unique shape helps you safely hold your small piece while cutting.\u003cbr\u003e\u003cbr\u003eThe wishbone shape has rubber feet on all three ends. This allows you to set your piece, and then place the 10 Million Dollar Stick with one foot on the piece, one foot on the saw plate and the other out to the side for firm pressure. Hold the piece firmly against the fence and make the cut. For wider parts, use in the opposite position. The single-end will be nearer the blade and the wishbone side out to provide steady pressure as you make the cut.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eKeeps hands away from blade while cutting small parts\u003c\/li\u003e \u003cli\u003eErgonomic Injection moulded design\u003c\/li\u003e \u003cli\u003eWishbone shape with gripping, rubber feet\u003c\/li\u003e \u003c\/ul\u003e","brand":"FastCap","offers":[{"title":"Default Title","offer_id":55734063825269,"sku":"10MILSTICK","price":17.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/2052a1da-0d0d-4f19-8ea3-1ce3194f9be7.jpg?v=1754391957"},{"product_id":"fastcap-3rd-hand-hd","title":"FastCap 3rd Hand HD","description":"\u003cp\u003e\u003cspan\u003eThe FastCap 3rd Hand HD is that helping hand you have been looking for.  If you ever wished you had an extra hand, look no further. It is rugged, built to last a lifetime and it's never late for work! Brace, jack, or support whatever you need. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePrecision Jack System\u003c\/li\u003e \u003cli\u003eTelescoping 1524mm - 3658mm (60\" - 144\")\u003c\/li\u003e \u003cli\u003eTwo 75mm x 75mm (3\" x 3\") Articulated Feet\u003c\/li\u003e \u003cli\u003e69g (150lb) Load Capacity\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003ePlease note: Images are for illustrative purposes only - Product is sold as individual item\u003c\/p\u003e","brand":"FastCap","offers":[{"title":"Default Title","offer_id":55734064054645,"sku":"3-HHANDHD5","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/f659d09a-6702-451d-ad60-171623324755.jpg?v=1754391958"},{"product_id":"fastcap-little-hand","title":"FastCap Little Hand","description":"\u003cp\u003e\u003cspan\u003eThe FastCap Little Hand is designed to support upper cabinets after the base cabinets have been installed. Designed for residential construction.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePrecision Jack System\u003c\/li\u003e \u003cli\u003eTelescoping 419mm - 597mm (16.5\" - 23.5\")\u003c\/li\u003e \u003cli\u003eOversized 150mmx 150mm (6\" x 6\") Foot Support\u003c\/li\u003e \u003cli\u003e69g (150lb) Load Capacity\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003ePlease note: Images are for illustrative purposes only - Product is sold as individual item\u003c\/p\u003e","brand":"FastCap","offers":[{"title":"Default Title","offer_id":55734064251253,"sku":"3HLITTLE","price":49.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/c3deb066-504b-4988-ae31-95dd9ec33901.jpg?v=1754391959"},{"product_id":"fastcap-accuscribe-pro","title":"FastCap AccuScribe Pro","description":"\u003cp\u003eThe FastCap AccuScribe Pro makes it easy to maintain a consistent scribe offset, staying parallel to the object surface every time. It is ideal for scribing trim on kitchen cabinets, architectural mouldings, counter-tops, splash guards, tile and even flooring. Fits a standard pencil, Sharpie, or the FastCap FatBoy Pencil.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFlat bottom for precise marking\u003c\/li\u003e \u003cli\u003eRetractable compass point\u003c\/li\u003e \u003cli\u003eIntegrated pencil sharpener\u003c\/li\u003e \u003cli\u003eFits a standard pencil, sharpie marker or the FastCap FatBoy Pencil\u003c\/li\u003e \u003c\/ul\u003e","brand":"FastCap","offers":[{"title":"Default Title","offer_id":55734065234293,"sku":"ACCUSCRIBEPRO","price":17.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/89267f42-0eae-42b5-8f2d-835fb173158e.jpg?v=1754391967"},{"product_id":"auktools-silicone-chisel-guards-set-of-10","title":"AUKTools Silicone Chisel Guards (Set of 10)","description":"\u003cp\u003eEdge guards or tip protectors are made from a somewhat hard plastic that either fits well because it is made for the chisel or it doesn't fit and slips off. Our AUKTools Silicone Chisel Guards are made from soft silicone. They will fit over practically any chisel, stay on and actually protect the chisel's edge from hard knocks.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSoft silicone chisel edge guards go on and stay on\u003c\/li\u003e \u003cli\u003eProtect edges against 'hard knocks'\u003c\/li\u003e \u003cli\u003eFit chisels from 3mm to 33mm\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2 x 3mm-7mm\u003c\/li\u003e \u003cli\u003e2 x 9mm-13mm\u003c\/li\u003e \u003cli\u003e2 x 15mm-20mm\u003c\/li\u003e \u003cli\u003e2 x 22mm-27mm\u003c\/li\u003e \u003cli\u003e2 x 27mm-33mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734067659125,"sku":"AUKCHISELGRD","price":12.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/d1af76a0-c8cf-40ca-a287-f3de73c047e7.jpg?v=1769079447"},{"product_id":"auktools-router-motor-2400w-with-speed-control-nvr-switch","title":"AUKTools Router Motor 2400W with Speed Control NVR Switch","description":"\u003cp\u003eThe AUKTools Router Motor 2400W is engineered for precision and reliability in router table and CNC work, delivering smooth high-torque power with premium bearings and safety features built in. From delicate joinery to shaping panels and components, it provides the control and consistency woodworkers depend on for lasting results.\u003c\/p\u003e  \u003ch6\u003eDesigned with Peter Sefton\u003c\/h6\u003e \u003cp\u003eSpecified by Wood Workers Workshop’s owner, Peter Sefton - a master craftsman and woodworking educator - the AUKTools Router Motor reflects decades of professional experience. From premium bearings to the ER20 collet system and safety controls, every element is chosen to deliver lasting performance in demanding workshops.\u003c\/p\u003e  \u003ch6\u003ePrecision \u0026amp; Control\u003c\/h6\u003e \u003cp\u003e\u003cstrong\u003eAbove-Table Cutter Changes\u003cbr\u003e\u003c\/strong\u003eUnlike plunge routers, the AUKTools motor raises cutters fully above the table for faster, safer changes - no lost cutter length, no awkward reaches, no compromise on accuracy.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eVariable Speed NVR Control\u003cbr\u003e\u003c\/strong\u003eThe external remote combines a speed dial (10,000-20,000 RPM) with a built-in NVR safety switch, giving you precise adjustment and safe, convenient control at the bench.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eConstant Torque Under Load\u003cbr\u003e\u003c\/strong\u003eThe 2400W high-torque motor and premium-class bearings deliver smooth, reliable performance in hardwoods, panels, and end-grain alike.\u003c\/p\u003e  \u003ch6\u003eBuild Quality \u0026amp; Engineering\u003c\/h6\u003e \u003cp\u003e\u003cstrong\u003ePremium Components\u003cbr\u003e\u003c\/strong\u003eFitted with two of the best bearings in its class, a hardened ER20 collet system, and sealed electronics - all designed for durability in tough, dust-heavy workshops.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePrecision-Machined Components\u003cbr\u003e\u003c\/strong\u003eEvery part is engineered to fine tolerances, ensuring smoother operation, reduced vibration, and accuracy you can rely on year after year.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWorkshop-Ready Design\u003cbr\u003e\u003c\/strong\u003eA robust housing and durable construction keep accuracy and balance over years of use, with minimal maintenance required.\u003c\/p\u003e  \u003ch6\u003eSafety \u0026amp; Ease of Use\u003c\/h6\u003e \u003cp\u003e\u003cstrong\u003eRemote NVR Safety Switch\u003cbr\u003e\u003c\/strong\u003eOn\/Off and variable speed control are always accessible above the table. The NVR prevents accidental restarts after power loss, protecting both you and your work.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmergency Stop Protection\u003cbr\u003e\u003c\/strong\u003eA twist-to-release stop button lets you instantly isolate the motor for stress-free cutter changes and setup adjustments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSoft-Start Technology\u003cbr\u003e\u003c\/strong\u003eGradually brings the motor up to speed, reducing torque shock, improving safety, and extending component life.\u003c\/p\u003e  \u003ch6\u003eCompatibility \u0026amp; Support\u003c\/h6\u003e \u003cp\u003e\u003cstrong\u003eWide System Fit\u003cbr\u003e\u003c\/strong\u003eDesigned for 106.6mm (4.2\") router lifts including AUKTools, INCRA, JessEm, and Woodpeckers - ensuring seamless integration with your table setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExpert UK Support\u003cbr\u003e\u003c\/strong\u003eBacked by decades of router table experience, our team provides hands-on advice and aftercare to help you get the very best from your motor.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734067921269,"sku":"AUKFBR24ERRSC","price":329.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/a7884e43-104b-4ac0-8683-7b7202e13093.jpg?v=1754391979"},{"product_id":"auktools-pure-air-system","title":"AUKTools Pure Air System","description":"\u003cp\u003eThe AUKTools Pure Air System is the ultimate dust collection system for router tables with our AUKTools Router Motor 2400W, past and present models and can retrospectively be added to your setup.\u003c\/p\u003e \u003cp\u003eImprove your workshop conditions by removing dust simultaneously at source above and below the cutter whilst feeding the router fresh air. Simply fix to the underneath of your router table, hook up to your router fence and dust extractor for a clean workshop and healthy, pure air.\u003c\/p\u003e \u003cp\u003eThe AUKTools Pure Air System consists of three main components:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAUKTools Pure Air System Dust Box\u003c\/li\u003e \u003cli\u003eAUKTools Pure Air System Dust Hood\u003c\/li\u003e \u003cli\u003eAUKTools Pure Air System Hose\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTogether, these create a unique package that enables the AUKTools Router Motor 2400W to intake clean, fresh air, improving the cooling and longevity of the motor when used within a dust cabinet.\u003c\/p\u003e \u003cp\u003eThis Dust Box has been designed with a removable cover in the base of the box, which is held in place with magnets. Removing this cover reveals an opening into which the Dust Hose is threaded\u003c\/p\u003e \u003cp\u003eThe Dust Hood fits snugly over the existing AUKTools Router Motor 2400W cap providing a collar for the hose to connect onto, creating the Pure Air corridor.\u003c\/p\u003e \u003cp\u003eThe rear extraction port comes with a 63 mm (2.5\") on the upper section for convenient fence extraction, leading to a lower 100 mm (4\") dust port connector for optimal dust collection to the extractor.\u003c\/p\u003e \u003cp\u003eAccessing your router is simple thanks to the hinged front door, held closed by magnets to the heavy-duty, powder-coated steel cabinet. The right side of the box has a removable opening to allow cables and NVR switches to be fed through, while the left side has an external vent to regulate the balance of air intake for controlled dust extraction. Fits all common lifts and routers for improved air quality and a quieter workshop.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTechnical Note\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe AUKTools Pure Air Dust Box is intended for use with conventional woodworking dust or chip collectors rated at approximately 350 CFM (165 litres\/sec) or higher, with a minimum 100 mm (4\") inlet diameter.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe AUKTools Pure Air System is \u003cstrong\u003enot compatible\u003c\/strong\u003e with the JessEm Excel II Sidewinding Lift. The system is \u003cstrong\u003enot compatible\u003c\/strong\u003e with standard 63mm (2-1\/2”) wet\/dry shop vacuums.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease Note: The colour of the AUKTools Pure Air System Dust Hood may vary.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for AUKTools Router Motor 2400W (all versions)\u003c\/li\u003e \u003cli\u003eDust control above and below the table\u003c\/li\u003e \u003cli\u003eImproved workshop air quality\u003c\/li\u003e \u003cli\u003eCompatible with most INCRA and JessEm router lifts (Excel II not compatible) and a range of router tables\u003c\/li\u003e \u003cli\u003eNoise reduction\u003c\/li\u003e \u003cli\u003eRegulated air intake\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHeavy-duty powder-coated steel cabinet\u003c\/li\u003e \u003cli\u003eCabinet weight: 6 kg\u003c\/li\u003e \u003cli\u003eHinged door 252 mm (H) x 205 mm (W) with magnetic latch\u003c\/li\u003e \u003cli\u003eExtraction ports: 63 mm (2.5\") in, 100 mm (4\") out\u003c\/li\u003e \u003cli\u003eNVR switch and cable access panel\u003c\/li\u003e \u003cli\u003eOverall size: 380 mm (H) x 320 mm (W) x 400 mm (D)\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734068511093,"sku":"AUKPADS","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/6e586b45-0da0-4eab-bfdc-1ee07d00b3d0.jpg?v=1754391985"},{"product_id":"auktools-router-bit-foam-tray","title":"AUKTools Router Bit Foam Tray","description":"\u003cp\u003eThis AUKTools Router Bit Foam Tray is designed for the storage and organisation of 1\/2\" and 1\/4\" shank router bits. The high-density foam has a series of 110 holes (50x 1\/2\" and 60x 1\/4\") spaced to prevent damage to the edges of the router bits.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eProtect your router bits\u003c\/li\u003e \u003cli\u003eFaster router bit selection\u003c\/li\u003e \u003cli\u003eFor 1\/4\" and 1\/2\" shank router bits\u003c\/li\u003e \u003cli\u003eHigh-density foam\u003c\/li\u003e \u003cli\u003eSize: 325mm x 274mm x 33mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734069789045,"sku":"AUKRBST","price":12.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/29580a19-99a9-43c0-b28e-a8c824a836f7.jpg?v=1754391985"},{"product_id":"auktools-solid-brass-router-inlay-kit","title":"AUKTools Solid Brass Router Inlay Kit","description":"\u003cp\u003eAUKTools' Solid Brass Inlay Kit includes a 1\/8” downcut solid carbide spiral bit (1\/4\" Shank) for chip-free cutting, quick-change bushing, template guide and complete instructions. The router base required for fitting the guide bush must have a clear 30.16mm (1-3\/16\") diameter aperture. A sub-base adaptor may be required.\u003c\/p\u003e \u003cp\u003eThis inlay set lets allows you to make perfect fitting inlay repairs and decorations. First make a template of your design. Install the precision machined bushing with collar and 1\/8\" diameter cutter in your router and follow the template to cut the design in your work. Remove the collar from the bushing and cut the positive inlay using the same template. You now have a perfect fitting inlay.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734070509941,"sku":"AUKSBRIK","price":32.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/4f8f4e91-ee10-4629-8fa4-9f6cd3e38171_1695cf17-2d21-4c43-9a62-8267026f3826.jpg?v=1769674355"},{"product_id":"auktools-woodworking-setup-blocks-metric","title":"AUKTools Woodworking Setup Blocks (Metric)","description":"\u003cp\u003eAUKTools Woodworking Setup Blocks are designed to help woodworkers quickly and accurately set the height of saw blades, dado saws, router bits or the depth of drill bits. They are also great for setting up fences and gauges.\u003c\/p\u003e \u003cp\u003eThese solid aluminium blocks come in 9 different sizes and are precision milled to a block thickness accuracy of 0.004\"\/0.1mm.\u003c\/p\u003e \u003cp\u003eThe set is finished in a vibrant Red anodised finish and comes with a durable protective case to keep it safe.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAccurate, quick, easy setup of blades, bits, fences, gauges and more\u003c\/li\u003e \u003cli\u003eAluminium construction\u003c\/li\u003e \u003cli\u003eBlock thickness accuracy: 0.004\"\/0.1mm\u003c\/li\u003e \u003cli\u003eThickness: 1, 2, 4, 6.5, 8, 16, 18 and 25 x 50 x 100mm\u003c\/li\u003e \u003cli\u003eRed anodised finish\u003c\/li\u003e \u003cli\u003eProtective case\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734070608245,"sku":"AUKSETBLK","price":39.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/6d4bb1a3-9e76-4af9-9a60-5ec3823317a3_d363245e-5b86-4470-934f-91cbc5fd2f95.jpg?v=1769674090"},{"product_id":"auktools-router-table-insert-pad","title":"AUKTools Router Table Insert Pad","description":"\u003cp\u003eThe AUKTools Router Table Insert Pad is ideal for woodworkers making a homemade router table or those with pre-made MDF table tops. The stainless steel 1.8mm thick insert is suitable for use with 9-1\/4\" (235mm) X 11-3\/4\" (298mm) router plates or lifts, including AUKTools, INCRA, JessEm and Woodpeckers. Made exclusively for AUKTools and designed by Peter Sefton.\u003c\/p\u003e \u003cp\u003eQuality router plates and lifts incorporate levelling screws to set the plate flush within router table tops. Still, if the levelling screws are in contact with the MDF core these can eat into the MDF or wear over time as the router vibrates. The AUKTools Router Table Insert Pad overcomes these issues providing a flat and durable base to your router plate.\u003c\/p\u003e \u003cp\u003eMake the perfect cut-out in your router table top with our \u003ca href=\"\/products\/router-table-router-insert-plate-template\" title=\"Router Insert Plate Template\"\u003eRouter Insert Plate Template\u003c\/a\u003e.\u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e \u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734071689589,"sku":"AUKSSINPAD","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/485b309b-abf3-4b03-8b10-ae4cd7509172_0bebe684-582a-483e-ae09-c812f7543b1e.jpg?v=1774281080"},{"product_id":"auktools-router-insert-plate-template-and-steel-insert-pad","title":"AUKTools Router Insert Plate Template and Steel Insert Pad","description":"\u003cp\u003eIf you are making your own table and you want an easy way to make a perfect cut-out for a router plate or lift, including AUKTools, Woodpeckers, INCRA or JessEm, the AUKTools Router Insert Plate Template and Steel Insert Pad is the perfect combination. With this template and insert, you can rout out a perfectly sized 9-1\/4\" (235mm) x 11-3\/4\" (298mm) opening using a template router bit with a bearing on the shank (not supplied) and then lay the insert into the opening for an accurate flat surface for your router plate to reference.\u003c\/p\u003e \u003cp\u003eMachined from 18mm MDF (400mm x 560mm) for a perfectly smooth bearing surface and large enough for clamps.\u003c\/p\u003e \u003cp\u003eThe AUKTools Stainless Steel Insert Pad is a 1.8mm thick insert that is suitable for use with 9-1\/4\" (235mm) X 11-3\/4\" (298mm) router plates or lifts, including AUKTools, INCRA, JessEm and Woodpeckers.\u003c\/p\u003e \u003cp\u003eQuality router plates and lifts incorporate levelling screws to set the plate flush within router table tops but if the levelling screws are in contact with the MDF core these can eat into the MDF or wearing in overtime as the router vibrates. The AUKTools stainless steel insert plate overcomes these issues providing and flat and durable base to your router plate.\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734071722357,"sku":"AUKSSINPLATEPAD","price":32.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/20074d85-429c-4181-a080-7d5b9df22fb5.jpg?v=1754391999"},{"product_id":"auktools-thin-rip-jig","title":"AUKTools Thin Rip Jig","description":"\u003cp\u003eFrom delicate fretwork to inlaid cutting boards, a variety of projects require thin strips of wood that are a consistent, accurate dimension. Trying to make those thin strips between your table saw blade and your fence can cause kickback, binding and burning. \u003c\/p\u003e \u003cp\u003eThe AUKTools Thin Rip Jig provides an accurate datum on the offcut side of the blade that allows the user to create same-sized strips repeatedly, all you need to do is move your fence closer to the blade as you cut each time.\u003c\/p\u003e \u003cp\u003eSetting up the Thin Rip Jig is easy to do. Just slide the guide into your saw’s mitre\/T-slot and lock it between 50mm-75mm in front of the saw blade. You can set the width of cut using setup blocks or set the dimension you want on the laser-engraved scale, lock your fence so your stock is just touching the bearings and make the cut. Repeat as often as needed by moving your fence each time so your stock references the bearing.\u003c\/p\u003e \u003cp\u003eThe Thin Rip Jig is designed to work with most saws from portable jobsite saws up to the largest cabinet saws. The jig fits mitre slots that are 3\/4\" x 3\/8\" (19.1mm x 9.5mm) with a T-slot, but it will also fit if the saw has a T-Track for a 11mm wide T-Bolt with alternative supplied hardware.\u003c\/p\u003e \u003cp\u003eThe Thin Rip Jig is made from CNC machined aluminium. The scales are in millimetres and are laser engraved on the red anodised aluminium body.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSolid CNC machined aluminium construction\u003c\/li\u003e \u003cli\u003eThe telescopic arm reaches a maximum of 140mm (5-1\/2\")\u003c\/li\u003e \u003cli\u003eDimensions - 183mm (L) x 94mm (W) x 45mm (D)\u003c\/li\u003e \u003cli\u003eThe jig is stationary, while the fence is moved for each cut\u003c\/li\u003e \u003cli\u003eFits 3\/4\" x 3\/8\" (19.1mm x 9.5mm) with a T-slot, it will fit or if the saw has a T-Track for a 11mm wide T-Bolt\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734093283701,"sku":"AUKTRJIG","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/7841644b-d1ad-4d5b-860c-1404cb364087.jpg?v=1754392216"},{"product_id":"auktools-t-track-regular-610mm-24","title":"AUKTools T-Track Regular 610mm (24\")","description":"\u003cp\u003eAUKTools T-Track Regular is a single T-Track with no scale and can be cut to fit your jig exactly. Choose from four lengths - 610mm (24\"), 915mm (36\") and 1219mm (48\"). Excellent for locating your clamping fixtures, jigs and feather boards.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLarge t-slot accepts standard 1\/4-20 hex bolts and nuts\u003c\/li\u003e \u003cli\u003eMount easily with pre-drilled holes and included hardware pack\u003c\/li\u003e \u003cli\u003eHard anodised aluminium for durability\u003c\/li\u003e \u003cli\u003eExternal measurements approx 19mm (3\/4\") wide x 12.4mm (1\/2\") deep\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease Note:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Extrusion sizes can vary slightly\u003c\/span\u003e \u003c\/p\u003e \u003ch5\u003eFAQs\u003c\/h5\u003e \u003cp\u003eQ. Do Lever Clamps for MFT tables work in this track?\u003c\/p\u003e \u003cp\u003eA. Yes, clamps that work with this track include MicroJig Dovetail and AP Clamps, Festool Ratchet Lever Clamps and Bessey Lever Clamps. \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734095806837,"sku":"AUKTTRK24","price":12.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/bc77e22a-ceab-47fe-acab-c33d9fe67a83.jpg?v=1769674091"},{"product_id":"auktools-t-track-regular-915mm-36","title":"AUKTools T-Track Regular 915mm (36\")","description":"\u003cp\u003eAUKTools T-Track Regular is a single t-track with no scale and can be cut to fit your jig exactly. Choose from four lengths - 610mm (24\"), 915mm (36\") and 1219mm (48\").  Excellent for locating your clamping fixtures, jigs and feather boards.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLarge t-slot accepts standard 1\/4-20 hex bolts and nuts\u003c\/li\u003e \u003cli\u003eMount easily with pre-drilled holes and included hardware pack\u003c\/li\u003e \u003cli\u003eHard anodised aluminium for durability\u003c\/li\u003e \u003cli\u003eExternal measurements approx 19mm (3\/4\") wide x 12.4mm (1\/2\") deep\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e Extrusion sizes can vary slightly\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch5\u003eFAQs\u003c\/h5\u003e \u003cp\u003eQ. Do Lever Clamps for MFT tables work in this track?\u003c\/p\u003e \u003cp\u003eA. Yes, clamps that work with this track include MicroJig Dovetail and AP Clamps, Festool Ratchet Lever Clamps and Bessey Lever Clamps. \u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734096134517,"sku":"AUKTTRK36","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/9879f231-93b4-4e29-9046-48e74d3a45ce.jpg?v=1769674092"},{"product_id":"auktools-t-track-regular-1219mm-48","title":"AUKTools T-Track Regular 1219mm (48\")","description":"\u003cp\u003eAUKTools T-Track Regular is a single t-track with no scale and can be cut to fit your jig exactly. Choose from four lengths - 610mm (24\"), 915mm (36\") and 1219mm (48\"). Excellent for locating your clamping fixtures, jigs and feather boards.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLarge t-slot accepts standard 1\/4-20 hex bolts and nuts\u003c\/li\u003e \u003cli\u003eMount easily with pre-drilled holes and included hardware pack\u003c\/li\u003e \u003cli\u003eHard anodised aluminium for durability\u003c\/li\u003e \u003cli\u003eExternal measurements approx 19mm (3\/4\") wide x 12.4mm (1\/2\") deep\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e Extrusion sizes can vary slightly\u003c\/span\u003e\u003c\/p\u003e \u003ch5\u003eFAQs\u003c\/h5\u003e \u003cp\u003eQ. Do Lever Clamps for MFT tables work in this track?\u003c\/p\u003e \u003cp\u003eA. Yes, clamps that work with this track include MicroJig Dovetail and AP Clamps, Festool Ratchet Lever Clamps and Bessey Lever Clamps. \u003c\/p\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734096429429,"sku":"AUKTTRK48","price":27.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/f2e3bb0e-58d2-4fac-9010-e0396284d90c.jpg?v=1769674093"},{"product_id":"auktools-vice-rack-stop","title":"AUKTools Vice Rack Stop","description":"\u003cp\u003eThe AUKTools Vice Rack Stop is designed to help prevent racking when clamping your workpiece at one side of a vice. The Vice Rack Stop allows the vice to hold the workpiece more securely and prevent it from being damaged.\u003c\/p\u003e \u003cp\u003eMade from a high-density polyethylene you can stack up as many of the 2.5mm (0.1\") thick shims as you need to match the approximate thickness of your work, up to a total of 76mm (3\"), and insert it into the vice opposite the workpiece being clamped.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMade from durable high-density polyethylene\u003c\/li\u003e \u003cli\u003eShims are 2.5mm (0.1\") thick, with a total thickness of 76mm (3\")\u003c\/li\u003e \u003cli\u003eSize: 76mm x 36mm x 76mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734096691573,"sku":"AUKVICERACK","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/09c88a83-c504-4d6b-9793-dd409bf1878b_0ea3b437-8f59-46bb-9bac-2bb59c936a60.jpg?v=1769674338"},{"product_id":"auktools-wheel-marking-gauge","title":"AUKTools Wheel Marking Gauge","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMark perfect joints every time. The extra-sharp replaceable cutter is hardened and marks a keen accurate line, preventing grain tear out during material scribing. One-hand easy-set design requires no additional tools.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e175mm (7\") long shaft giving up to 150mm (6\")depth adjustment \u003c\/li\u003e \u003cli\u003eSolid brass body\u003c\/li\u003e \u003cli\u003eHardened steel wheel cutter\u003cbr\u003e \u003c\/li\u003e \u003cli\u003eCuts wood fibres, rather than tears\u003cbr\u003e \u003c\/li\u003e \u003cli\u003eMarks cleanly, even on cross-grain\u003cbr\u003e \u003c\/li\u003e \u003cli\u003eThe wheel retracts into the face of the gauge for storage and protection\u003cbr\u003e \u003c\/li\u003e \u003cli\u003eThe gauges are very easy to set\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eReplacement wheels available \u003ca href=\"%%GLOBAL_ShopPathSSL%%\/products\/auktools-wheel-marking-gauge-replacement-wheel\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"AUK Tools","offers":[{"title":"Default Title","offer_id":55734096822645,"sku":"AUKWMG","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/5f5b00c7-96b0-42ea-9f76-fb341c54ff98_9e8bde30-8651-4439-bde8-0d5422e1518d.jpg?v=1769674320"},{"product_id":"bow-products-bench-mat-18-x-24","title":"Bow Products Bench Mat 18\" x 24\"","description":"\u003cp\u003eThe Bow Products Bench Mat is a handy workmate in the workshop or around the home, a handy placemat or tool rest for many projects. The mat holds small pieces in place and stands out against the green background. The 2-ply material protects the edge of tools and also protects work surfaces and delicate pieces. Ideal for a multitude of applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eProtects tools, work surfaces and delicate materials.\u003c\/li\u003e \u003cli\u003eGrips and stabilises materials and tools.\u003c\/li\u003e \u003cli\u003eProtects finished bench and table-top surfaces.\u003c\/li\u003e \u003cli\u003eUse as liners in drawers, containers or cabinets.\u003c\/li\u003e \u003cli\u003e18” X 24” (457mm x 610mm).\u003c\/li\u003e \u003cli\u003e2-ply Thermoplastic polyamide elastomers (TPA) material.\u003c\/li\u003e \u003cli\u003eSoft yet strong and durable material.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734101967221,"sku":"BPBM1824","price":22.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/3a6c75d2-eadf-4b44-a7ef-fa2c8afd0251.jpg?v=1769079138"},{"product_id":"bow-products-featherpro-featherboard","title":"Bow Products FeatherPRO Featherboard","description":"\u003cp\u003eThe FeatherPRO Featherboard features EVA feathers which have revolutionized Featherboard performance and safety. EVA is a high-density closed-cell material that is exceptionally durable, highly flexible, non-marring and won’t damage your cutting tools or delicate work. EVA offers benefits you cannot get with plastic or wooden feathers, including excellent feed control and five times the kickback resistance of traditional featherboards. Designed for use on Band Saws, Table Saws and Router Tables.\u003c\/p\u003e \u003cp\u003eThe EVA feathers' effectiveness stems from their ingenious shape and surface contact area, the patented hinging design pushes forward giving consistent chatter-free pressure and instantly locks solid absorbing energy if kickback occurs. The reversible, replaceable and interchangeable feathers are a quick press fit into the high-grade polymer body. If accidental damage occurs just replace the feathers with our standard black replacements or swap them out for the grey UltraFlex feathers which offer lighter pressure for small or delicate work without the loss of safety.\u003c\/p\u003e \u003cp\u003eThe highly visible green mounting body comes with a 3\/4\" x 3\/8\" (19.1mm x 9.5mm) mounting bar, and also fits 12mm to 18mm wide T-Track used on many router tables, table saws and band saws.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIdeal for Band Saw, Table Saws, Routers tables\u003c\/li\u003e \u003cli\u003e145mm of travel\u003c\/li\u003e \u003cli\u003ePatented hinge feather design absorbs kickback and provides 5x greater resistance against kickback\u003c\/li\u003e \u003cli\u003eThicker EVA feathers increase the amount of surface contact on the workpiece, ensuring a smoother glide and superior infeed control\u003c\/li\u003e \u003cli\u003eEVA Feathers absorb vibration and minimize chatter for a cleaner cut\u003c\/li\u003e \u003cli\u003eFeathers are non-marring and will not harm carbide blades or router bits if accidental contact\u003c\/li\u003e \u003cli\u003eFeathers are reversible, replaceable, and interchangeable\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFeatherPRO mounts to a 3\/4” x 3\/8” (19mm x 9.5mm) Mitre Slot or 12-18mm T-Track\u003c\/li\u003e \u003cli\u003eThe 225mm long mitre bar quickly secures in the Miter Slot with minimal effort and maximum strength\u003c\/li\u003e \u003cli\u003eMitre bar has integrated T Bolts and a greater expansion range that covers variations in slot size\u003c\/li\u003e \u003cli\u003e2 Large Comfortable Ergonomic knobs\u003c\/li\u003e \u003cli\u003eStandard EVA Feathers\u003c\/li\u003e \u003cli\u003eT Bolts 2x 5\/16\"-18 x 1.5” long fully threaded T Bolts (Head Dimensions: 18.42mm(L) x 11.43mm(W) x 2.29mm(D)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734102065525,"sku":"BPFP1","price":33.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/f6da1b16-8f91-4c68-bfc0-27f5c8be4fd3.jpg?v=1769079446"},{"product_id":"bow-products-featherduo-featherboard","title":"Bow Products FeatherDUO Featherboard","description":"\u003cp\u003eThe FeatherDUO Feather board offers all the breakthrough benefits of EVA Feathers in a stackable platform. Ideal for feeding taller material on Table Saws, Band Saws and Router Tables. The FeatherDUO includes two separate FeatherPRO feather boards along with two risers and long bolts for a maximum stackable height of 89mm (3.5\"). You can also stack the two feather boards without the risers.\u003c\/p\u003e \u003cp\u003eThe FeatherDUO represents great value offering multiple combinations in one complete package. FeatherDUO comprises two FeatherPRO feather boards, two standard replacement feathers, a pair of risers, a mitre slot bar plus hardware for use as individual or stacked formats.\u003c\/p\u003e \u003cp\u003eThe FeatherDUO is ideal for taller material feeds, when stacked, it is approximately 89mm tall making it ideal for feeding taller material through the table saw, bandsaw or the router table. The standard feathers are strong and incredibly durable. The hinge design of the feathers provides unmatched protection against kickback. Made from EVA foam, the feathers will not harm carbide cutting tips in the event of an accident. The main body is a high-grade polymer moulding and includes a standard 19.1mm (3\/4\") mitre slot bar that fits in a lot of table saws or router tables.\u003c\/p\u003e \u003cp\u003eBow feathers are press-fit into the FeatherDUO. Reversible for left or right feed and if accidentally damaged you can replace the feather.\u003c\/p\u003e \u003ch4\u003eFeatures\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAll the benefits and options in one complete package\u003c\/li\u003e \u003cli\u003eVirtually eliminates kickback\u003c\/li\u003e \u003cli\u003e89mm high when stacked ideal for tall workpieces\u003c\/li\u003e \u003cli\u003eIncludes hardware for use as 2 individual feather boards\u003c\/li\u003e \u003cli\u003eUltraFLEX EVA Feathers for firm even pressure\u003c\/li\u003e \u003cli\u003eFits standard 19.1mm x 9.5mm (3\/4” x 3\/8”) mitre slots\u003c\/li\u003e \u003cli\u003ePatented hinge feather design absorbs kickback and provides 5x greater resistance against kickback versus plastic or wood feathers\u003c\/li\u003e \u003cli\u003eThicker EVA feathers increase the amount of surface contact on the work piece, ensuring a smoother glide and superior infeed control\u003c\/li\u003e \u003cli\u003eEVA Feathers absorb vibration and minimize chatter for a cleaner cut. Feathers are non-marring and will not harm carbide blades or router bits if accidental contact\u003c\/li\u003e \u003cli\u003eFeathers are reversible, replaceable, and interchangeable\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2x FeatherDUO with two UltraFLEX EVA Feathers\u003c\/li\u003e \u003cli\u003e2x 3\/4″ AnchorPRO Miter Bars mount to 19.1mm x 9.5mm (3\/4″x 3\/8″) mitre slot,\u003c\/li\u003e \u003cli\u003e4x Large Comfortable Ergonomic knobs\u003c\/li\u003e \u003cli\u003eStacking Hardware: 2x 4-3\/8″ T Bolts (5\/16″-18 thread) for use with two Risers provided for Maximum Height Stack of 3 1\/2″ and 4x 2 1\/4″ T Bolts (5\/16″-18 thread) for Stacking without Risers to height of 1 1\/2″\u003c\/li\u003e \u003cli\u003eT Bolts fit 12-19mm (Head Dimensions: 18.42mm(L) x 11.43mm(W) x 2.29mm(D)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734102163829,"sku":"BPFP3","price":62.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/07c256a2-fa78-4518-addc-d1302b259809.jpg?v=1754392236"},{"product_id":"bow-products-fencepro-featherboard-2-pieces","title":"Bow Products FencePRO Featherboard - 2 Pieces","description":"\u003cp\u003eThe FencePRO Featherboard is designed for use to hold down material on lots of different types of fences. The FencePRO features the same EVA feather technology as the FeatherPRO and FeatherDUO, which has revolutionized featherboard performance and safety.\u003c\/p\u003e \u003cp\u003eWith FencePRO, you apply firm downward pressure yet still maintain a smooth glide. The feathers apply a greater surface contact area that dampens vibration without marring material for the cleanest possible cut. FencePRO protects you against kickback far better than plastic or wood feathers.\u003c\/p\u003e \u003cp\u003eEVA is a high-density closed-cell material that is exceptionally durable and absorbs energy from kickback. Feathers are also shatterproof and unlike plastic feathers can be replaced if damaged. FencePRO offers benefits you simply cannot get with plastic or wooden feathers. Use FencePRO with the FeatherPRO featherboards for the ultimate in feed control and safety. The FencePRO comes in a pack of 2 for use separately or for stacking.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSingle knob actuation\u003c\/li\u003e \u003cli\u003eFast setup and strong hold\u003c\/li\u003e \u003cli\u003eFirm glide with the EVA foam feathers\u003c\/li\u003e \u003cli\u003eVibration dampening\u003c\/li\u003e \u003cli\u003eNon-marring\u003c\/li\u003e \u003cli\u003eReversible and replaceable feathers\u003c\/li\u003e \u003cli\u003eStackable\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e4 EVA Feathers on each FencePRO\u003c\/li\u003e \u003cli\u003eLarge ergonomic knob\u003c\/li\u003e \u003cli\u003e100mm (4”) travel slot\u003c\/li\u003e \u003cli\u003eT Bolts Dimensions - 5\/16\"-18 x 1.5\" long fully threaded T Bolts (Head Dimensions: 18.42mm(L) x 11.43mm(W) x 2.29mm(D)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734104490357,"sku":"BPFP4","price":36.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/d4b5404a-af3c-45c5-80dd-32f882454391.jpg?v=1754392236"},{"product_id":"bow-products-portable-saw-featherboard","title":"Bow Products Portable Saw Featherboard","description":"\u003cp\u003eFeaturing all the same benefits of the revolutionary EVA feathers, the Bow Products Portable Saw Featherboard extends the safety and performance benefits of the FeatherPRO to DIY and Contractor saws.\u003c\/p\u003e \u003cp\u003eThe featherboards smaller profile easily fits portable saw tables and with a single knob actuation, you can set up quickly and effortlessly. Safety is the hallmark of Bow EVA featherboards, EVA feathers combined with their hinge design can absorb kickback force while feathers open as the material moves backwards pinching it against the fence. EVA feathers deliver other important safety advantages as well, in the event of accidental contact with a cutter, EVA feathers are shatterproof, unlike plastic feathers which can become dangerous projectiles. Simply replace the EVA feathers and the featherboard is back up and running.\u003c\/p\u003e \u003cp\u003eAs important as safety is, EVA feathers deliver unmatched feed control and the cleanest cuts. EVA feathers hold the material firmly for a smooth controlled feed, even under firm tension. EVA feathers dampen vibration and are non-marring on even the softest of materials. EVA feathers are exceptionally durable, and the Bow green colour means the featherboard is easy to find.\u003c\/p\u003e \u003cp\u003eThe Portable Saw Featherboard comes with a 5\/8\" (15.88mm) and 3\/4\" (19.1mm) mitre bar with onboard storage for the extra bar. Works on router tables and fences too.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSingle Knob Actuation\u003c\/li\u003e \u003cli\u003e150mm (6\") Travel Slot\u003c\/li\u003e \u003cli\u003eFast Set Up\/Strong Hold\u003c\/li\u003e \u003cli\u003eFirm Glide\u003c\/li\u003e \u003cli\u003eVibration Dampening\u003c\/li\u003e \u003cli\u003eNon-Marring\u003c\/li\u003e \u003cli\u003eReversible and Replaceable EVA Foam Feathers\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e4 EVA Feathers\u003c\/li\u003e \u003cli\u003eLarge Comfortable Ergonomic Knob\u003c\/li\u003e \u003cli\u003e5\/8” (15.88mm) and 3\/4” (19.1mm) mitre bars cover a lot of mount applications\u003c\/li\u003e \u003cli\u003eOnboard storage for unused mitre bar\u003c\/li\u003e \u003cli\u003eT Bolts 2x 5\/16\"-18 x 1.5” long fully threaded T Bolts (Head Dimensions: 18.42mm(L) x 11.43mm(W) x 2.29mm(D)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734104555893,"sku":"BPFP5","price":21.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/0d2422e2-7331-48ba-a327-5216a66dfb59.jpg?v=1769079446"},{"product_id":"bow-products-guidepro-bandsaw-guide","title":"Bow Products GuidePRO Bandsaw  Guide","description":"\u003cp\u003eThe GuidePRO is a unique tall pressure board that offers addition blade guarding and cutting accuracy. It’s the ideal feed tool to improve the quality of cut whilst improving your safety. Easy to set up in various band saws mitre slots between 50mm and 200mm away from the blade. It comes with three cams for mitre slots 15mm, 5\/8” and 19mm wide. Setting the flexible 150mm tall feather 6mm in front of the blade keeps hands safe whist giving consistent feed pressure over the entire length of the cut.\u003c\/p\u003e \u003cp\u003eWith its flexible silicone feather, GuidePRO adjusts to virtually any material shape and delivers a perfect cut every time.\u003c\/p\u003e \u003cp\u003eThe detachable robust solid aluminium base also acts as a square and 150mm (6”) rule for fence and blade set up, the GuidePRO is a must have for every band saw user.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e150mm tall non marring silicon feather delivers consistent pressure along the workpiece for a clean and consistent cut.\u003c\/li\u003e \u003cli\u003eFlexible feather dampens vibration and accommodates variations in shape and thickness of material. Adds precision when cutting thin strips, veneers or laminates.\u003c\/li\u003e \u003cli\u003eSets up in seconds! Miter cam pivots in the mitre slot to set in position. Simply position the GuidePRO with the feather in front of the blade and on the material, apply desired pressure as you push the workpiece forward to within 6mm of the blade, and then press down the locking lever.\u003c\/li\u003e \u003cli\u003eSmart SAFETY advantage. When the GuidePRO is set and you begin to feed the material, the GuidePRO is positioned between your hands and the blade.\u003c\/li\u003e \u003cli\u003eGuidePRO comes with 3 miter cams for the different size mitre slots on band saws 15mm, 5\/8” and 3\/4”.\u003c\/li\u003e \u003cli\u003eGuidePRO Base is detachable and doubles as a 150mm measuring and squaring tool for setting the fence\u003c\/li\u003e \u003cli\u003eComfortable Ergonomic grip\u003c\/li\u003e \u003cli\u003eFeather is replaceable if damaged\u003c\/li\u003e \u003cli\u003eWorks great with fences and resaw guides\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734107341173,"sku":"BPGP5","price":78.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/c456692a-914f-4978-9b61-60301a862fe4.jpg?v=1769079446"},{"product_id":"bow-products-pushpro-push-stick","title":"Bow Products PushPRO Push Stick","description":"\u003cp\u003ePushPRO Push Sticks use the same high-density EVA foam seen in their Featherboards. Bringing improvements and material innovations to a tool category that’s not seen innovation for years. Featuring reversible and replicable high-density foam tips, PushPRO improves feed control, protects wood, and protects you and your tools in case of accidental contact between the push stick and the blade. PushPRO eliminates the use of plastic to guide wood. When pressure is applied, plastic can mar or skid off some wood. The EVA high-density foam tip will absorb vibration and not shatter if it comes into contact with a cutter or saw blade.\u003c\/p\u003e \u003cp\u003eThe PushPRO Push Stick delivers a better cut than plastic-only push stick. The ergonomically designed long handle can also be unclipped and replaced with shop-made timber replacement for any special situations, the 460mm long PushPro conforms with UK and European standards.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBetter feed control delivers a cleaner cut. The high-density EVA foam pad grips and conforms to the wood and dampens vibration for a cleaner cut.\u003c\/li\u003e \u003cli\u003eNon-marring high-density foam pads will not mar even the softest wood under high tension. Plastic push sticks can dent softwood or compress the surface adversely affecting stain and glue absorption.\u003c\/li\u003e \u003cli\u003eFoam Tips are replaceable and reversible. Should you accidentally contact the blade with the PushPRO, unlike plastic push sticks, the high-density foam pad will not harm the carbide tip blade.\u003c\/li\u003e \u003cli\u003ePushPRO improves safety. When a plastic or wooden push stick comes in sudden contact with a blade, the reaction can sometimes be violent and pose a risk to your safety. PushPRO high-density foam pads cut smoothly absorbing the impact of accidental contact with the blade.\u003c\/li\u003e \u003cli\u003eErgonomic Handle for comfortable feed control.\u003c\/li\u003e \u003cli\u003e460mm long conforms with UK and European standards.\u003c\/li\u003e \u003cli\u003eModular construction enables possibilities such as designing your own custom handle which can be mounted to the coupler.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734108127605,"sku":"BPPP1","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/3ac3a210-291d-4792-b631-f8ee07b83b39_a91fa263-a1d0-4480-b3b0-79691c7e07ba.jpg?v=1769079445"},{"product_id":"bow-products-mini-pushpro-push-stick","title":"Bow Products Mini PushPRO Push Stick","description":"\u003cp\u003eThe Mini PushPRO uses the same high-density EVA foam on its tip that BOW use in their FeatherPRO Featherboards and GuidePRO. In this case the EVA offers several advantages over traditional hard materials. The EVA foam is firm but can fit slightly to the object and better maintain contact at a slight angle. The tip helps dampen vibration aiding a cleaner cut and, best of all, it will not damage an expensive cutter through accidental contact. The tips are reversible and replaceable.\u003c\/p\u003e \u003cp\u003eThe MINI PushPRO Push Stick features our shorter handle and is 317mm long. If you want a different handle, no problem. The PushPRO modular design lets you adapt your own custom-made handle.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigh density EVA foam tip will not damage an expensive cutter\u003c\/li\u003e \u003cli\u003eTips are reversible and replaceable\u003c\/li\u003e \u003cli\u003eFirm EVA foam fits to shape\u003c\/li\u003e \u003cli\u003eMaintains good contact even at a slight angle\u003c\/li\u003e \u003cli\u003eTip helps dampen vibration aiding a cleaner cut\u003c\/li\u003e \u003cli\u003eApproximately 317mm long\u003c\/li\u003e \u003cli\u003eComfortable ergonomic grip for excellent control\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734108193141,"sku":"BPPP2","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/1df251be-e468-4a56-a8ea-76cfd6cd52f2.jpg?v=1769079445"},{"product_id":"bow-products-xt-feed-supports-pair","title":"Bow Products XT Feed Supports (Pair)","description":"\u003cp\u003eBow Products XT Feed Supports are the perfect addition to Bow Products XT Xtender Fence, providing feed support and feed control to smaller saw and band saw table surfaces.\u003c\/p\u003e \u003cp\u003eMade exclusively for Bow Products this accessory, when partnered with one of Bow Products XT Xtender Fences, will transform your existing table saw fence giving greater feed control, supporting stock both on infeed and outfeed and improving your safety in the workshop.\u003c\/p\u003e \u003cp\u003eThe feed supports measure 6.25\" (~159mm) wide and extend 3\" (75mm) out from the fence, they attach to the bottom of the XT Xtender Fence to be level with your saw table top, they are finished with a bevelled edge to accept material feed through the saw easily.\u003c\/p\u003e \u003cp\u003eThe underside of the feed supports contains a cavity measuring 1-9\/16\" x 3-9\/16\" (39.7mm x 90.5mm) to add additional stability leg when using heavier materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExclusively for use with Bow Products XT Xtender Fences (sold separately).\u003c\/li\u003e \u003cli\u003eTransforms small table surfaces such as portable saws and band saws for greater feed control and safety.\u003c\/li\u003e \u003cli\u003eFeed Supports Expand your table surface in tandem with XT Xtender Fences for expanded infeed and outfeed support.\u003c\/li\u003e \u003cli\u003eThe bottom of the fed support contains a cavity (1-9\/16\" x 3-9\/16\") to attach a wood support if additional stability is necessary for heavier material.\u003c\/li\u003e \u003cli\u003eHardware includes 6 T-bolts and 6 knobs to attach the two feed supports\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eImportant Notice: Use Bow Products safety products to improve your safety when machining, they should complement your machine guards not replace them; for a safe and happy life of woodworking. All relevant health and safety practices that apply in your country of residence should be followed.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734110945653,"sku":"BPXT1","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/96b2f490-0ee8-4e23-94ab-2c141731f016.jpg?v=1769079445"},{"product_id":"bow-products-xt-t-track-clamps-pair","title":"Bow Products XT T-Track Clamps (Pair)","description":"\u003cp\u003eBow Products' XT T-Track Clamps are ideal for attaching Bow Products' XT Xtender Fence to all saw fences including band saw fences.\u003c\/p\u003e \u003cp\u003eThe clamps slide into the custom-milled slots in the XT Xtender Fence, providing a firm and secure fixing to your existing fence.\u003c\/p\u003e \u003cp\u003eThe clamps can extend to a 5\" (127mm) opening and have a 2.5\" (63.5mm) throat. They can also be used in standard 1\/4\" T-Track for general clamping applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSolid steel bar with forged head to fit XT Xtender Fences\u003c\/li\u003e \u003cli\u003eSoft rubberised handle for a more comfortable grip\u003c\/li\u003e \u003cli\u003eStrong and durable construction\u003c\/li\u003e \u003c\/ul\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734110978421,"sku":"BPXT2","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/41e0fec4-04a6-409a-9da8-4c565a7a017f.jpg?v=1769079445"},{"product_id":"bow-products-xt-xtender-fence-package-36","title":"Bow Products XT Xtender Fence Package - 36\"","description":"\u003cp\u003eUpgrade your woodworking with the XT Xtender Fence Package. Designed to bring unparalleled control and safety to a wide range of power saws. From compact benchtop saws to portable job site equipment, professional cabinet saws, and bandsaws, the XT Xtender Fence is your trusted companion for precision and versatility.\u003c\/p\u003e \u003cp\u003eThe XT Xtender Fence is engineered to fit nearly all compact, portable and cabinet table saws, including Bosch, Festool, DeWalt and Makita. Its generous 5\" (127mm) height and 1\" (25.4mm) width offer a robust foundation for your woodworking projects. This innovative platform attaches effortlessly to your existing fence using the supplied XT T-Track Clamps as part of this package.\u003c\/p\u003e \u003cp\u003eWhat sets the XT Xtender Fence apart is its remarkable versatility and ease of use. With this platform, you can set up, remove, or change fence positions in seconds, delivering a convenient set-up for a wide range of work. Whether you want to centre the XT Xtender Fence on your table or extend it for infeed or outfeed support, the XT Xtender Fence offers precise adjustments at your fingertips.\u003c\/p\u003e \u003cp\u003eManufactured with multiple T-slots, the XT Xtender Fence accepts a wide range of accessories such as Bow Products XT Feed Supports, featherboards or homemade stops. It forms the foundation for use with the Bow Products Featherboard range that will elevate your feed control, cut quality, and most importantly, your safety.\u003c\/p\u003e \u003cp\u003eFor portable table saw owners, the XT Xtender Fence and XT Feed Supports transform your equipment, giving it the capabilities and feed control of a full-size cabinet saw. For a Bandsaw owner, it's a game changer extending your table surface.\u003c\/p\u003e \u003cp\u003eCrafted from a heavy-duty aluminium extrusion the XT Xtender Fence is accurately machined, durable and rugged. the fence has a 4\" (100mm) flat face on the 5\" (127mm) surface with a T-Slot on the top. The flat face ensures a smooth glide for your workpiece.\u003c\/p\u003e \u003cp\u003eThe XT Xtender Fence Packages are available in three lengths: 24\", 36\", and 46\", accommodating various saws and project requirements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1 x XT Xtender Fence 36\"\u003c\/li\u003e \u003cli\u003e1 x XT T-Track Clamps (Pair)\u003c\/li\u003e \u003cli\u003e1 x XT Feed Supports (Pair)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMilled slots on the back of the XT Xtender Fence for fast attachment to the existing fence using two XT T-Track Clamps, exclusive to the XT Xtender Fence range.\u003c\/li\u003e \u003cli\u003eMultiple milled slots enable versatile fence positioning: infeed, centre and outfeed.\u003c\/li\u003e \u003cli\u003e3 T-Slots, one on the face, one on the top and one at the back accept 1\/4\" and 5\/16\" T Bolts for adding feed control accessories such as Bow Products XT Feed Supports or Featherboards.\u003c\/li\u003e \u003cli\u003eIncludes standoffs on the bottom of the fence to help the XT Xtender Fence glide smoothly across the table saw surface.\u003c\/li\u003e \u003cli\u003eConvenient hanging hole for easy storage.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eImportant Notice: Use Bow Products safety products to improve your safety when machining, they should complement your machine guards not replace them; for a safe and happy life of woodworking. All relevant health and safety practices that apply in your country of residence should be followed.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Bow Products","offers":[{"title":"Default Title","offer_id":55734113468789,"sku":"BPXT436PKG","price":228.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/6650\/files\/61eb4156-dc7a-4a12-a342-efc305ac5378.jpg?v=1769079445"}],"url":"https:\/\/woodworkersworkshop.co.uk\/collections\/best-selling\/joinery-jigs.oembed","provider":"Wood Workers Workshop","version":"1.0","type":"link"}