The Veritas Router Plane is ideal for cutting dadoes and grooves or for cleaning out areas to a precise depth. With a ductile cast iron body accurately machined and ground flat to a high standard. Blade depth is set by a fine screw feed and a positive...

The Veritas fence, made of stainless steel and aluminium, can be positioned on either side of the plane and will work on both straight and curved pieces. In addition to using for dadoes or grooves, the router plane is the perfect tool for inlay or for...

This 75mm-wide router plane looks and works like its full-size counterpart; comfortable to hold and manoeuvre, it's ideal for hardware installation or fine inlay work. It comes with a 3.2mm wide A2 tool-steel blade (hardened to HRC 60-62),...

This extra long replacement screw is designed for use with thicker replacement plane blades.  The cap iron screw supplied with standard thin bent chip breaker/cap iron may not be long enough to reach through a thicker 3-4mm plane blade, so this...

The Veritas Low Angle Block Plane stands apart from all others; its 12 degree bed angle and low cutting angle of 37 degrees excel at working end grain. It has higher side-wings ideal for shooting, finger grips in each side for better control, and a...

Our AUKTools Scratch Stock Blades are made from alloy sprung steel, ideal for hand filing and honing in readiness for producing small mouldings and scratching out grooves for inlays. Sizes Available 12mm x 50mm 15mm x 50mm 16mm x 50mm 24mm x 50mm

The Veritas Low Angle Jack Plane is ideal for shooting mitres, working end grain and initial smoothing. Veritas have designated it as a 62 1/2 because of its generous size, greater weight, low centre of gravity and radically set-back mouth. Measuring...

Veritas Spokeshave Flat Base has been designed for smooth, effective, chatter-free shaping of chair spindles, panel edges, paddles and tool handles. The 3.2mm(1/8") thick PMV-11 steel blade, machined lever cap and blade bed achieve chatter-free...

Weighing in at 48 grams and measuring 63.5mm long by 6.3mm wide the Veritas Miniature Shoulder Plane is the smallest plane Veritas have made. This plane offers excellent manoeuvrability, comfort and control. Perfect for cleaning dados and channels...

Veritas Spokeshave Curved Base has been designed for smooth, effective, chatter-free shaping of chair spindles, panel edges, paddles and tool handles. The 3.2mm(1/8") thick PMV- 11 steel blade, machined lever cap and blade bed achieve chatter-free...

High carbon steel cutters. Two-piece 12.7mm (1/2") straight blade. Two-piece blade makes sharpening a great deal easier.

The Veritas Planing Stop 248mm is a perfect holding solution when hand planing thin or wide stock on your bench top.  The anodised 248mm long aluminium rail projects just 5.5mm above the bench top, allowing you to plane boards as thin as 6mm without...

The mass of this plane, its long base and low centre of gravity make it both stable and effective. Tipping the scales at just over 3.5g and just under 400mm long, it is a substantial plane, you will appreciate the authority it provides when shooting...