Veritas Low Angle Smoothing Plane with PMV-11 Blade

A low angle smoothing plane has three key uses. It is used to smooth surfaces, preferably taking a diagonal cut, partly across and partly along the grain.

With its generous side wings, it is ideal for shooting mitres and great for end-grain work. The low cutting angle of 37 degree minimises fibre tearing. With a bed angle of 12 degree, this is a bevel-up plane like a low angle block plane. It features an adjustable mouth with a unique stop-screw, a combined feed and lateral adjustment knob for blade setting, and a generous hardwood front knob and rear handle. The ductile cast iron body is 254 x 63mm (10" X 2.1/2"). Overall weight is just over 1.1g (3.1/2 lb.).

The supplied 25 degree bevel blade is 50mm (2") wide by 3.2mm (1/8") thick, lapped, and available in O1 or PM-V11 alloy steel. For working difficult grain, additional blades are available with 38 degree or 50 degree bevels.

The lapped blades have a flatness tolerance of ±0.005mm or better over the working surface, and with an average roughness surface finish of 0.000127mm (5 micro inches) or better.