If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountOur honing guide is designed with similarities to the classic Eclipse Honing Guide. Consistency is the key in sharpening, and using a honing guide will give you the exact bevel angle every time you sharpen a blade.
The honing guide has two clamping positions. The upper clamping position accommodates blades up to 78mm(3-1/8") wide. The lower "V" clamping position holds bevel edge chisels or thiner blades from 3mm(1/8") to 48mm(1-7⁄8") wide.
The bevel angle on this guide depends on the blade's projection in front of the guide. Plane irons in the upper clamping position: 50mm (2") gives a 25° bevel and 38mm (1-1/2") gives a 30° bevel.
Chisels or blades placed between the lower "V" clamping position: 40mm (1-9/16") for a 25° bevel or 30mm (1-3/16") for a 30° bevel.
The guide’s roller allows you to hone both straight cutting edges or by slightly rocking the guide you can put a cambered edge on a plane iron.
Veritas
The most versatile Veritas honing guide set to date. This five-piece deluxe honing guide set includes both the standard and narrow blade clamping heads, as well as the angle registration jig,...
Veritas
Because of the difficulty holding short blades such as those found in most spokeshaves, instrument makers' planes, etc., sharpening them has been difficult. The Veritas small-blade holder solves...
Veritas
The Veritas Skew Registration Jig is an accessory for the Veritas Mk. II Honing Guide and replaces the standard 90-degree jig to set both skew and bevel angles, left and right on chisel and...
Veritas
Veritas Mk II Standard Honing Guide features a blade registration system which means squaring and setting the blade is one easy step. The Mk II Honing Guide has three bevel angle range...
Veritas
Veritas Mk II Honing Guide Standard Set with Camber Roller Assembly comprises a Mk II Honing Guide and a Camber Roller Assembly used to hone a slight curve, or camber, into the edge of...
