If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Exceptionally high clamping forces can be obtained with this hold down, as the arm is free to pivot independently.
All levered forces are exerted downward, without any loss due to horizontal slippage from the canting action of the hold down post. The fine grooves on the post resist upward forces, yet still allow easy entry into a 19mm diameter hole.
The 250mm hold down post gives you 200mm of clamping capacity, matching the 200mm throat capacity. Used vertically on the top of a bench, or horizontally in a side skirt.
Armor Tool
Armor Tool Auto-Adjust Horizontal T-Track Clamp is fitted with a 5/16" T-Bolt that inserts and tightens into most 5/16" T-Track. Clamp rotates 360 degrees, allowing for a wide range of clamping...
Armor Tool
Armor Tool Auto-Pro Dog Pegs are for the P7-HH Auto-Pro Horizontal Dog Clamp to convert them for use with 20mm dog holes. The recommended minimum table thickness is 3/4" for optimal...
Armor Tool
Armor Tool Auto-Pro 4" (102mm) Dog Fence easily slide into dog holes and allow you to position and brace materials or set up corners. Dog Fences are reversible with a high side and a low side to...
Armor Tool
Used in conjunction with Armor Tool Auto-Adjust In-Line Dog Clamp P7-IL, this knob attaches underneath the table to firmly secure and prevent and lift wh
Armor Tool
Armor Tool Auto-Pro 14" (355mm) Dog Fence easily slide into dog holes and allow you to position and brace materials or set up corners. Dog Fences are reversible with a high side and a low side to...
