Veritas

The Veritas Dovetail Saddle Marker 1:8 is precisely machined tool with the traditional 1:8 angle.  Designed with long legs to ensure accurate registration on the workpiece.  The saddle enables you...

The knife has an A2 tool-steel blade, ground to a point with a 25° bevel. It leaves a clearly incised line that serves to guide a saw or chisel when starting a cut, helping to improve accuracy...

The best tool available for quick and accurate marking of dovetails. Supplied as a pair, a 1:6 for softwoods and a 1:8 for hardwoods. Both are 50mm(2") x 50mm(2") and made from anodised aluminium...

Veritas No. 5 1/4 Bench Plane with PMV-11 Blade - the "Junior" Jack Plane has a 50mm wide blade and the mouth is 110mm back of the nose -this extra length of sole in front of the blade makes...

The Veritas Low Angle Jack Plane is ideal for shooting mitres, working end grain and initial smoothing. Veritas have designated it as a 62 1/2 because of its generous size, greater weight, low...

This honing compound, is one of the most effective on the market. It is primarily aluminium oxide blended with other fine abrasives to give the best combination of cutting speed and fine, mirror...

Veritas Narrow Blade Clamp Head Only is available as an accessory for existing owners of the standard Veritas Mk II Honing Guide. It is interchangeable with the standard head in seconds. It securely...

Veritas Mk II Standard Honing Guide features a blade registration system which means squaring and setting the blade is one easy step. The Mk II Honing Guide has three bevel angle range...

The most versatile Veritas honing guide set to date. This five-piece deluxe honing guide set includes both the standard and narrow blade clamping heads, as well as the angle registration jig,...

Veritas Camber Roller Assembly M0905 is an attachment specifically designed for use with the Veritas Mk II Honing Guide.  Use it to hone a slight curve, or camber, into the edge of the blade when...

Because of the difficulty holding short blades such as those found in most spokeshaves, instrument makers' planes, etc., sharpening them has been difficult. The Veritas small-blade holder solves...

Veritas Mk II Honing Guide Standard Set with Camber Roller Assembly comprises a Mk II Honing Guide and a Camber Roller Assembly used to hone a slight curve, or camber, into the edge of...

Veritas Shaft Clamp for Dual Marking Gauge is used to lock the relative position of the two rods on the Veritas Dual Marking Gauge, when a project requires a constant mortice size, but different...

Replacement wheel for Veritas gauges. A hardened steel wheel cutter which scribes perfectly at any point of its circumference and also avoids pin chatter.