The Titman Edge Storage Pouch is the perfect storage for your diamond sharpening equipment. The pouch can store all of the Titman Edge James Barry Sharpening Solutions diamond stone range. Measuring 210mm x 80mm x 10mm and made from 100% Nylon the pouch...

A replacement pair of bushings for the Tormek SE-77 Square edge jig. Please Note: Image showing Tormek SE-77 Square Edge Jig is for illustrative purposes only. Item sold is the bushing pair circled.

Suitable for use with all Tormek machines. The Tormek RM-533 Rubber Mat gives you a waterproof, non-slip surface. The raised rim will retain any water spillage. 533 x 343mm. Features A waterproof and non-slip surface Raised rim helps to retain...

With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.The rotation of the stone presses the axe firmly into the jig and enhances...

The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool. The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone...

The RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds. Some tools are best sharpened with the stone running...

With the Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an...

This unique turning tool setter enables exact replication of the edge on bowl and spindle gouges as well as on flat and oval skews with a straight or a curved edge. The setter works with the Gouge Jig SVD-186 and the Multi-Jig SVS-50. The strength of...

The Tormek T-4 incorporates new, innovative, patent pending features. Firstly, the zinc cast top incorporates the key components of the main shaft, Universal Support and motor assembly resulting in superb accuracy as standard. Secondly, the Universal...

Use the SVD-186-R for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge. The Tormek SVD-186-R will handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to...

Exchange diamond bit is for use with the Tormek Truing Tool TT-50.

This little jig is designed for sharpening short woodcarving tools and the shortest chisels. Suitable for straight shanked tools, such as wood chisels, carving gouges and tools for power carvers. The jig has two parallel flanges running on both...

With the SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also...

The Tormek T-8 sharpening system is the perfect answer to your sharpening requirements. For any professional or amateur needing a versatile, reliable and repeatable sharpening system, the T-8 should be on the top of your list. The T-8 has a 250mm x 50mm...

It is not without reason this jig is named 'Multi Jig'. It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one. With SVS-50 you can sharpen square and...