iGaging EZ Cal Digital Caliper 4"

Super high quality and easy to ready with the largest LCD display available. Ideal for measuring thicknesses, groove widths and used as an accurate depth gauge. Vernier calipers are probably our most used measuring tool in the workshop and they just seem to be the first measuring device we reach for.

Not all verniers are created equal. In fact the iGaging EZ Cal digital vernier calipers are without equal in quality at this price level.

To get the most from your woodworking machines, you are now able to measure down to 50th mm, thousandths of an inch. There are plenty of more expensive instruments available for doing exactly that, but what partly complicates matters is that human eyesight generally doesn't improve with age.

These are the easiest to read calipers that we've seen. Not only are the numbers giant at 14mm tall, but the digits are also widely spaced. The 1/10,000" digit at the right side of the display is half-height, so it's legible without being distracting when reading decimal inches.

These calipers have a 100mm (4") capacity and the display reads to 0.01mm, 0.0005" or 1/128" at the press of a button. There's also a handy decimal/fraction conversion chart on the back. Precision-ground stainless steel jaws allow precise, repeatable outside, inside, depth, and step measurements. With a quick measuring speed of 120" per second. All iGaging EZCal verniers are IP54-splash water, oil and dust resistant and individually serialised.

They are produced from hardened stainless with a precision lapped smooth finish, Fitted case and two CR2032 batteries included.

Features

• Easy read SUPER LARGE display (2-3/8"x7/8")
• IP54 - Splash water, oil and dust resistant
• Hardened stainless steel
• Precision lapping finish
• Range: 0-4"
• Accuracy: 0.001"
• Repeatability: 0.0005"
• Resolution: 0.0005"/0.01mm/1/128"

Includes

• 1x iGaging EZ Cal 4" (100mm) Caliper
• 1x Spare Battery (One Fitted)
• 1x Instruction Set

Please Note: Colours may vary, Black or Silver