JessEm TA Fence

JessEm TA Fence is the newest addition to the Router Fence line-up. A uniquely engineered router fence held to the toughest of tolerances ensuring long lasting precision and use. 

Time and again, the same old router fence “L” shape aluminium extrusion is used. The problem that manufacturers run into with this design is the twisting and warping that may occur when extruding a shape that long. This can be overcome with machining the part once it is cut; however, most router table fences on the market today skip this most important step. This is why JessEm’s new TA Fence is incredibly unique and precise. We have extruded three distinct extrusions, which are cut on our cold saw and each machined to the tightest of tolerances, ensuring you have a perfectly square router table fence with no bends or twists. At the top of each fence is an easy to read 36” scale in both imperial and metric measurements. As well, the main fence components are all anodised to give you years of lasting use.

The Sub-fences

The TA Fence sub-fences are extruded from 6000 series aluminium. They are then cut on a cold saw and each sub-fence is machined independently to the highest degree of accuracy. They are then “hard” anodised for that long lasting durability.  Both sub-fences are independently adjustable to handle different size router bits including the large raised panel bits.

Jointing Operations

The TA Fence gives the woodworker an exceptionally simplified way to do your jointing operations. No need to mess around with shimming bars, or plastic shims.  With the TA Fence adjusting your outfeed fence is as simple as loosening two knobs, turning the knurled dial at the back of your fence. Adjustments from 0” to ¼” are easily made. The adjustment module is precisely laser engraved and each revolution of the dial is equal to 1/16” adjustment to your outfeed fence.  Retighten the knobs and you are ready to go, quick and easy.

Adjustment Knobs

All of the adjustment knobs are precision machined with convenient knurls from either 303 Stainless Steel or 6000 series anodised aluminium. The TA Fence hold down knobs, are neatly mounted in anodised aluminium mounts with a stainless steel retainer, allowing for effortless adjustments. As well, the hold-down knobs are fixed into the retainer so the knobs stay fixed even when the fence is removed from the table. The TA Fence adjustment knobs; as well, are machined from stainless steel and mounted to an aluminium anodised mount for quick, no hassle adjustments.

The Guard

JessEm has designed this unique bit guard, not only to adjust the height for varying sized bits, but to also adjust the depth when routing away from your fence. With a simple turn of the knurled stainless steel hold down knob, adjust the depth to cover your bit and retighten the knob.

Fence Tracks

The right and left TA Fence Tracks are extruded from 6000 series aluminium and machined by CNC mill. Each track has a front and back cover so there is no dust collection build-up within the tracks. Each track has its own linear scale.

Vacuum Port

The TA Fence comes with our standard 2-1/2” (Outer Dimension) x 2-1/4” Internal Dimension) PVC 45° angle vacuum port.

Includes

• 1 x TA Main Fence Assembly
• 1 x Fence Guard Mount
• 2 x Fence Adjustment Knob Assemblies
• 1 x Guard Adjustment Shaft
• 2 x Track and Mounting Brackets (Left and Right)
• 1 x Hardware Pack, Torx Screwdriver and Hex Key

Made in Canada