If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Verum's Standard Angle Block Plane is designed for single handed planing and trimming with the grain. The polished bronze cap and planes milled side thumb and finger dimples make the plane a pleasure to use, nestling in the palm of your hand. Its 20 degrees bedding angle plus 30 degrees sharpened blade gives a "York Pitch" of 50 degrees, renowned for reduced tear out on common timbers. With the addition of a blade sharpened at 40 degrees this would achieve 60 degrees "Cabinet Pitch", perfect for interlocked or gnarly grain. Swapping the blade out for a 50 degrees sharpened blade will tackle the most demanding of timbers, almost acting as a scraper plane at 70 degrees. It's weight, balance and short sole make it a favorite plane for many makers allowing it to be agile and easy to use on a wide range of tasks including chamfers, flushing joints, final finishing and tackling tricky timbers.
Features
Specifications
Verum
Verum's Low Angle Block Plane excels at one handed end grain planning and trimming with the grain for perfect finishing, a must have for any woodworker! The polished bronze cap and planes milled side...
Verum
The No. 5 Jack Plane is considered an all-purpose plane, its narrow blade and lighter weight is ideal for preparing timber. If you grind a blade with a heavy camber, like a Scrub Plane, it quickly...
Verum
The No. 4 Smoothing Plane is designed for flattening and final finishing, taking the finest of shavings for an exceptional surface finish. With the shortest sole in the Verum bench plane range, the...
Verum
The No. 7 Jointer Plane is the largest in the range of Verum planes. The long sole of the Jointer (or Try Plane) is designed to ride over the low spots and skim off the high peaks of your board...
Verum
The No. 6 Fore Plane is the smaller of the Jointer style planes and has long been a favourite amongst professional furniture makers, it’s more nimble than a No.7 and more capable than a No.5 1/2 on...
Verum
The No. 5 1/2 Jack Plane is considered the 'jack of all trades' and the big brother to the No.5. It’s longer, wider and heavier, and that mass keeps going through the toughest of timbers. Considered...
