INCRA Telescoping Flip Fence 18" to 31" (Metric)

Ordered Incra 5000…product is a pleasure to work with. Service from the team was faultless and friendly.

This company has the best customer service I can remember receiving. I emailed a query tangentially related to the product and got a comprehensive reply by return. I ordered the product on.a Friday and it was delivered on Saturday. The Incra products are of course excellent quality. Only a shame they use imperial fasteners, but I did find I could run am M6 tap through the 1/4 X 20 hole in the sliding washer with no obvious I'll effect so I could fit a Bristol knob to the sliding extension adjustment.

I am extremely pleased because it works perfectly with the new miter gauge Dongdui which so precise and a perfect combination on my router table.

INCRA Telescoping Flip Fence 18" to 31" (Metric)

This fence with the flip-stop is a great piece of kit, suppliers are rare! Get it while you can.

Excellent quality product gives accurate & repeatable cuts, when used with my Kapex Mitre Saw. The new Build-It brackets allow easy removal and refitting when required.
Recommended!

The two extrusions are of good quality (not on par with what one would find on a pro grade sliding table saw, but still fairly rigid and for somewhat less money). The fence can be set up in a range of useful ways (I'm using mine as a table saw fence and held with third party 40mm fence dogs on a MFT like table)

The Incra racks are a useful feature and provide repeatability, at least on the non-telescopic side of the fence (as the telescopic extension glides smoothly without any millimetric steps, the benefit is reduced once the fence is extended). I do wish Incra did supply the fence with at least an extra red rack, as there are some gaps along the fence and one has to be careful when the flip stop is only making contact with the racks on one of its sides (it does work, to be honest)

The lexan rules are of good quality but only supplied in the right to left variant (I wish both variants were included and that Incra made a 122-164 L-R rule, but that's another story)

Used for mitre station - easy setup and calibration leads to accurate, repeatable cuts

I got this fence to go along with the Incra mitre gauge , upgrading the factory supplied one on my DeWalt 745 table saw.
Adjusting the gauge to fit the runners on my table was easy( although the grub screws are a little tight to turn). The fence was easy to set up, I’ve only used it on a couple of projects so far, and all cuts have been accurate. So all in all I’m very happy with my purchase

Fits well with my system

I use the fence with my track saw & find it very accurate for repeat cuts.

My second Incra purchase and, like the first, I cannot fault it. It's robust and reliable and exactly what I wanted to make a mitre saw fence. It won't be my last Incra purchase.

One thing - the support brackets are difficult to get hold of in the UK. I made my own and if I can then it's not really an issue...!

Great Replacement for the fence supplied with the 1000hd which I carelessly cut in half
Very good service

Brilliant kit and delivered in couple of days, I've purchased several items from Wood Workers Workshop in the last two years and had excellent service.

A great addition to v120 mitre guide. Very accurate and easy to adjust. High quality and substantial construction

Together with the flipstop this fence is a real asset to a mitre saw. Setting up the scales needs a fair bit of thinking and the instructions are very poor. Once you've worked it out it allows you to set accurate and repeatable stops to within the nearest mm with sped and ease

Very good customers support

This transforms the mft into a reliable and highly accurate device for scale-read repeat cuts . The incremental adjustment is simple but also transformative. I combined it with a pair of fence dogs which means it literally just lifts in and out the mft 20mm holes with no loss of accuracy

Having finally got a table saw with a 'standard' mitre slot (and a useless mitre gauge!) I'd been eyeing the Incra range of gauges.I couldn't justify the outlay a 1000HD would command and I had the offer of a V120 (likely to cover everything I will ever need) at a very good price so bought that, thinking I'd add a fence as and when. When came much sooner than anticipated - once I got the gauge I a wooden fence wasn't going to cut it!

I looked at the fixed length version (which could make use of my existing shop stop) & the 27-49". I had decided on the latter for the few extra pounds it would cost, however, on checking it was I was going to struggle to find enough 'elbow room' to actually use it. So I compromised on this one, the 18-31" which would give me the same length as the fixed fence with the flexibility of a 13" extension should I ever need it.

Like other Incra products this feels solid. It was simple to attach and square up to table and blade. I made bit of a boob with the lexan scale (RTFM!) but nothing irretrievable. Zeroing it to my table was far more straightforward than some videos suggest. My test cut was out by 1mm but on checking I found I'd lined the stop up wrong and the cut was accurate to what I'd set. I used it for real for the first time today and I'm very pleased with how Smooth it glides, how easy it is to set up and use and how it keeps my hands well away from the blade. Not forgetting it's repeatability. I didn't know quite what size workpiece I was going to need but knew there would be two of them. Having got one to size and shape I lined up one edge against the blade and positioned a stop at the other; moments later I had the two identical pieces I needed. No cheap but for the welfare of my fingers and simplicity of use well worth it.

High quality , does exactly what I wanted

Excellent addition to my mitre saw extremely accurate and repeatable measurements. Would thoroughly recommend this for any workshop based saw.

I bought this to use on a Festool MFT/3 as a replacement for the standard fence. A couple of the Incra BuildIt brackets attacthed to some rail dogs make it quick and easy to attach and remove from the table. The flip shop stop makes repeatable cuts a breeze.

Amazing product I've used it either side of a kapex mitre saw, no other length work stop can be dialled to the exact nearest millimetre as quickly as this can.