INCRA Router Table Combo #3+ with LS25 Upgrade (Metric)

I already had a small router table setup but the furniture I am now making needed a table with more workspace between bit and fence. I was torn between the incra and JessEm setups, both of which are supplied by Woodworkers Workshop. I couldn’t make my mind up as each has its own advantages so I paid a visit to the woodworkers demo room and Jim and Andy were excellent at taking me through the advantages and disadvantages of each setup in relation to what I wanted to do. I concluded in the end there isn’t a perfect setup but for my needs the Incra setup came closest. I have used it quite intensively since I bought it and it is excellent. The accuracy of the fence movement is spot on and the cleansweep setup with the cleansweep rings has been a game changer in terms of dust control, particularly when routing channels in the middle of a piece. I also wanted a better way of offsetting the two halves of the fence and I find this works well ( though I suspect the JessEm system is better in this respect).
The main reason for choosing the Incra system over the JessEm was the size of the table and I have already used the full capacity of the larger distance you can move the fence back so for me it was the right choice.
The one disappointment is that the slot in the fence face is quite low and as a result it isn’t easy to get any feather boards or stock guides to work on anything but the thinnest of pieces and in this respect the JessEm was a lot better but with less capacity between fence and router bit.
Overall I am really pleased with the setup but I must also say that the help from Jim & Andy was excellent both before the demo and since with no hard sell and lots of help and advice.

Needs good concentration in assembling but worth the effort. If you decide to build Incra’s cabinet for the router be sure to do it before assembling the router.

I am delighted with my new router table. The fence is rock solid and making course and fine adjustments is easy. I have yet to make use of the offset feature of the Wonder Fence but this capacity has great potential.
The only slight issue was the self assembly instructions- whilst accurate they were clearly written by someone who totally understood the system and therefore sometimes forgot to point out ‘the obvious’.

Well worth the wait only just built it and the quality shines.

This almost eliminates the need for test cuts as it is very accurate in positioning both the fence and the bit height.
The service from Woodworkersworkshop was very good but slightly let down by delays in Canada.

top quality looking forward to using over the summer

Have not been able to put this together yet but the quality is unquestionable. Very much looking forward to working with it soon.
Ordering and delivery service from woodworkers workshop is brilliant and I would not hesitate recommending them.

Have yet to assemble and use this Router Combo. Studying the assembly instructions and handling the components you know you when you have something very special. Incra Quality shines through.

The INCRA Combo #3 router table is a top quality table, engineered to an amazing standard. Well worth every penny.

This INCRA Combo #3 has replaced my home made table and fence, I only wish I had been aware of the INCRA
band before, it would have saved me time and money.
The equipment is easy to assemble, well engineered, good quality, with a very well presented technical manual and reference guide.
it is obvious a lot of effort has been put into the design to ensure operator satisfaction.
I am relatively new to woodworking and found to my cost, accuracy is of the utmost importance and the INCRA Combo #3 gives me that.
Thank you

I’ve had the AUK Router and INCRA mast-R-lift II for a little while and found that the only thing that let me down was my old table, so I brought this and instantly found the quality of the build was exceptional and the accuracy of my work increased a hundredfold. I’m not a master craftsman, having only gotten back into the hobby after near 30 years, but the quality of my pieces has improved significantly thanks to this system.
I’d have no problem in recommending this set up to anyone.
I also have to say a very big thanks to Nicki at Woodworkers for helping to sort the problem I had with the delivery company, she was on the issue from ‘go’ had a solution sorted. Cannot thank her enough, great service.

Really impressed with the build quality of the Incra table and positioner. There is no play at all in the fence once set up and I cant wait to start creating with the vast amount of templates that come with the kit.
The instructional DVD is really helpful, taking you through the set up in clear manageable stages. I took a laptop into the workshop and played each section whilst following along and had some great results, much better than I was expecting for a first try. Fantastic accuracy and great fun.

The table and frame once fixed is pretty solid and easily moved around the workshop, and could be easily utilised as a great storage space with some ply shelving /drawers.

Overall really pleased with my purchase, just a little careful set-up and the Incra has provided some great woodworking possibilities.

Thank you Woodworkers Workshop

Wow what can I say about this.... I have had many router tables from all different makers over the years and was always disappointed with the accuracy they delivered, not with this the quality is excellent with high precision made parts for true accuracy in all your routing needs.
The LS system has to be one of the best fence systems I have ever used along with the wonder fence this really is a perfect combination and I am looking forward to start using the template guides that come with the system for making various dove tail combinations, the DVD included has a running time of 120 minutes and shows the capabilities of what this machine can do.
I have the wheel kit fitted to the stand and have now started to box in the stand to include draws for all my router cutters, it will be nice too have them all in one place and at hand.
The top is of very high quality and has a nice surface finish and is true and flat and I would recommend this over cast iron
I also have the router lift fitted by jessem along with the AUK router with separate NVR switch and speed control.
The only issue I have is the cable for the AUK router is a bit too thick for the plastic grommet on the clean sweep box, but this is minor as this can not be seen from the front .
So I would highly recommend this product to any body who is looking for a top quality router table setup and I would not hesitate too recommend WOODWORKERSWORKSHOP to anybody out there, all my questions were answered and nothing was too much trouble.
So I would also like to thank Jim and Peter for all their assistance and look forward to future purchases.