INCRA Miter Express

The INCRA Miter Express features two embedded T-Slot channels to secure the included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable for mounting your own custom Jigs and Fixtures.

Shown with an optional INCRA Miter 1000SE mounted and ready, the INCRA Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available.

The fast "Dock and Lock" System securely locks your miter gauge in just seconds. It eliminates all side play with our patented miter channel expansion technology. Even the least expensive miter gauges will experience a tremendous performance boost when docked on top of the Miter Express.

Features

• Doubles Any Miter Gauge's Crosscut Range Up to 24"
• Safely Handles Both Extra Large and Extra Small Workpieces
• Eliminates All Side Play Between Table Saw's Miter Slot and Any Miter gauge
• Dual Embedded T-Tracks Secure the Included INCRA Hold-down Clamp and Other Mitering Accessories
• Eliminates All Drag Between Workpiece and Table Saw, ESPECIALLY for Extra Large Workpieces Superb Crosscut & Mitering Control

Doubles Any Miter Gauge's Crosscut Capacity to 24" and Securely Holds Even the Smallest Workpieces for Safe Accurate Cuts

The crosscut capacity of any miter gauge is safely doubled to more than 24" when docked on top of the Miter Express. For these extra-large crosscuts, the non-drag support provided by the sliding panel, along with the extra holding power of the included Hold Down Clamp adds much needed stability and control.

As shown, the same INCRA Hold Down Clamp also keeps your fingers comfortably away from the blade when cutting workpieces that are too small to safely hold by hand.

The Miter Express also includes an Outboard Fence Support that locks behind your fence in one of the two T-Slots, providing even more rigidity for all operations.

Assembles easily and 2 cuts give you zero clearance forever
The sliding main panel and the locking drop-off support panel are each trimmed with one simple cut during assembly for a perfect fit on YOUR table saw. The result is true Zero-Clearance Tearout Control on BOTH sides of the blade. The Miter Express is instantly removable from your saw table when making rip cuts or other operations that don't require a sled. And thanks to INCRA's quick release feature, your miter gauge undocks from the Express in seconds whenever you want to use your gauge on another tool such as a router table or sanding station.

Includes

• 1 x Small Mitre Express Panel w/rounded corners
• 1 x Small Mitre Express Panel w/square corners
• 1 x Large Mitre Express Panel D Hold Down Clamp
• 1 x Hardware Pack C-15 (Outboard Fence Support and Fasteners)
• 1 x Hardware Pack C-13 (Panel Assembly Fasteners and Hex Keys)
• 1 x Hardware Pack C-14 (T-Slot Retainers and Cam Screws)
• 1 x Utility Plate
• 1 x Panel Connector
• 1 x Aluminium Mitre Bar
• 1 x Set of UHMW Glide Strips

Please Note: INCRA Miter Gauge and Fence is NOT included and are available separately.

Compatibility

Miter slot spacing: The max distance between the mitre slots is 355mm (14") centre-to-centre.

Table size: For adequate support, the Miter Express requires a minimum of 203mm (8") from the outer edge of the mitre slot to either the left or right edges of the saw (sled can be installed on either side of the blade). Some portable or jobsite saws don't have enough table surface.