Skip to content

Musclechuck Quick Change Chuck Type 3

MCK_TYPE3
by Musclechuck™
£70.00

Musclechuck Quick Change Chuck allows you to change router cutters with ease and speed from above the router table and on a plunge router. Features cam-lock design that clamps and loosens with a partial turn using the included 5/32, ball-end, hex key wrench. Much quicker than the original two wrench method, change router cutters with ease and speed. 

Specifications

  • Musclechuck Size: 1/2 in
  • Corrosion Protection: Electroless Nickel
  • Nut Torque Max: 12 ft-lbs

Please Note: Style and make of the Ball End Hex Wrench may vary as stock allows.

Important Notice: PLEASE FOLLOW THE ENCLOSED INSTRUCTIONS FOR SETTING UP YOUR NEW MUSCLECHUCK. IT IS IMPORTANT THESE INSTRUCTIONS ARE FOLLOWED, FAILURE TO FOLLOW THESE INSTRUCTIONS IS A MISUSE OF THE MUSCLECHUCK ASSEMBLY.

Disclaimer: Power tools and their accessories, such as the 'Musclechuck™' assembly, should only be used for their intended purpose by users experienced in their operation. Careless handling or misuse may result in serious injury or death. Failure to follow the enclosed directions is a misuse of the 'Musclechuck™' assembly. The user must always make sure that the cutter is secure in the chuck, especially when a reduction collet is being used BEFORE turning on the router.

  • Dewalt 622 (European Only)
  • Hitachi M-12VC, M-12SC and M-12VS
  • Draper Expert 1300

FREE UK Delivery on all orders over £40 within the UK Mainland, Northern Ireland, Highlands & Islands. Only £4.50 on orders under £40.

Order before 2pm and we'll aim to despatch your order the same day, Monday to Friday. Please allow 1 to 2 working days for delivery. For the lastest COVID-19 delivery information please click on the link below.

Read More

Reviews

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
P.L.
Brilliantly engineered chuck.... and no more spanners!

I needed to do a bit of freehand routing today for a change, and finally got around to fitting the MuscleChuck 3 that I bought a few months ago.....what a transformation!
It took only seconds to install in my little Draper Expert 1300 and I can promise that it will not be coming out again - it really is that good. Cutter change is now almost instant, with no worries about over-tightening and messing about with spanners. Trust Woodworkers Workshop to be supplying only the best.... again.

x