Honing Guides

Veritas Mk II Standard Honing Guide features a blade registration system which means squaring and setting the blade is one easy step. The Mk II Honing Guide has three bevel angle range configurations: a high angle (25 degree to 54 degree in...

The most versatile Veritas honing guide set to date. This five-piece deluxe honing guide set includes both the standard and narrow blade clamping heads, as well as the angle registration jig, straight roller base and camber roller base. Combined,...

This honing compound, is one of the most effective on the market. It is primarily aluminium oxide blended with other fine abrasives to give the best combination of cutting speed and fine, mirror finish with a light wax film. The bonding is specially...

Veritas Narrow Blade Clamp Head Only is available as an accessory for existing owners of the standard Veritas Mk II Honing Guide. It is interchangeable with the standard head in seconds. It securely clamps blades as narrow as 1.5mm and up to 38mm square...

Our honing guide is designed with similarities to the classic Eclipse Honing Guide. Consistency is the key in sharpening, and using a honing guide will give you the exact bevel angle every time you sharpen a blade. The honing guide has two clamping...

Veritas Mk II Honing Guide Standard Set with Camber Roller Assembly comprises a Mk II Honing Guide and a Camber Roller Assembly used to hone a slight curve, or camber, into the edge of the blade. Veritas Mk II Honing Guide features a blade...

Veritas Camber Roller Assembly M0905 is an attachment specifically designed for use with the Veritas Mk II Honing Guide.  Use it to hone a slight curve, or camber, into the edge of the blade when planing on large, flat surfaces. The Veritas Camber Roller...

Because of the difficulty holding short blades such as those found in most spokeshaves, instrument makers' planes, etc., sharpening them has been difficult. The Veritas small-blade holder solves this effectively and safely by securing the blade using...