Musclechuck Quick Change Chuck Type 2EMCK_TYPE2E
Musclechuck Quick Change Chuck allows you to change router cutters with ease and speed from above the router table and on a plunge router. Features cam-lock design that clamps and loosens with a partial turn using the included 5/32, ball-end, hex key wrench. Much quicker than the original two wrench method, change router cutters with ease and speed. This extended version of the Musclechuck Type 2 works perfectly to add extra length to your collet that can be lost when the router is used with a router lift.
- Musclechuck Size: 1/2 in
- Corrosion Protection: Electroless Nickel
- Nut Torque Max: 12 ft-lbs
Please Note: Style and make of the Ball End Hex Wrench may vary as stock allows.
Important Notice: PLEASE FOLLOW THE ENCLOSED INSTRUCTIONS FOR SETTING UP YOUR NEW MUSCLECHUCK. IT IS IMPORTANT THESE INSTRUCTIONS ARE FOLLOWED, FAILURE TO FOLLOW THESE INSTRUCTIONS IS A MISUSE OF THE MUSCLECHUCK ASSEMBLY.
Disclaimer: Power tools and their accessories, such as the 'Musclechuck™' assembly, should only be used for their intended purpose by users experienced in their operation. Careless handling or misuse may result in serious injury or death. Failure to follow the enclosed directions is a misuse of the 'Musclechuck™' assembly. The user must always make sure that the cutter is secure in the chuck, especially when a reduction collet is being used BEFORE turning on the router.
- Dewalt 625
- Trend T9, T10 and T11
- Elu 177
- Festool OF2000 E-PLUS USA and OF1400 EQ PLUS USA
- Fein RT1800 and RT2000
- Freud FT1700VCE and 2000
- CMT's 1850 and 2000
- Metabo 1612
- Felisatti RF62 1500 VE
FREE UK Delivery on all orders over £40 within the UK Mainland, Northern Ireland, Highlands & Islands. Only £4.50 on orders under £40.
Order before 2pm and we'll aim to despatch your order the same day, Monday to Friday. Please allow 1 to 2 working days for delivery. For the lastest COVID-19 delivery information please click on the link below.