AUKTools NVR Switch (230v)

AUK-NVRSWITCH
by AUKTools
£44.95

An industrial-quality NVR Switch made exclusively for Wood Workers Workshop to run on a UK and European 230v domestic power supply. Fully wired with a BS three pin plug ready to use with 13 Amp power tools. 

Safety First!

  • Take control - no more scrambling under the table trying to find the on/off switch for your router - operate the router's on/off switch from your remote controller unit
  • Can be used as remote switching and isolation on a range of power tools including Lathes, Pillar Drills, Dust extractors
  • NVR (No Volt Release) switch - this means that if you suffer power loss, your router will not restart until you manually switch it back on
  • The emergency stop button locks on and can only be released when you physically twist to unlock it - allowing you to isolate your router whilst you change cutter.
  • Locate your remote controller unit wherever suits you - on the wall; on the side of your router table ...
  • Plenty of cable to play with - 1.2 metres between the BS1363/A Socket and the remote controller unit, plus 2.7 metres between the remote controller unit and the power supply
  • Particularly useful to owners of the INCRA Clean Sweep box and Insert Rings as the fully enclosed router is now controllable outside the box

Technical Specification

  • Size 80 x 115 x 96mm deep
  • Up to 15A switching and up to 2.2 KW capacity
  • Separate off and emergency isolating off buttons
  • Isolating emergency stop button with twist release
  • Double pole NVR isolator
  • Simple plug and play
  • Groundbreaking 3.9 meters total cable length for maximum flexibility
  • High level IP 54 rated for protection from dirt, dust and splashing water
    •   Please note this item is for use with double insulated tools with the double insulated symbol present on the tool
          • Reviews
          • Shipping
          • Customer Reviews

            Based on 5 reviews
            100%
            (5)
            0%
            (0)
            0%
            (0)
            0%
            (0)
            0%
            (0)
            s
            s.j.

            I PUCHASED THIS SWITCH TO USE WITH MY DEWALT 745 TABLE SAW. AND IT WORKS JUST FINE. WHOEVER AT DEWALT WAS RESPOSIBLE FOR PUTTING THE ON / OFF SWITCH WHERE IT IS, URGENTLY NEEDS A GOOD KICK ON THE ARSE.

            T
            T.
            NVR exceeds expectations

            I wanted to add this as an additional safety feature (emergency stop button) to my DeWalt 745 table saw, but I envisaged a problem. The Dewalt is controlled through it's own NVR and I was sceptical about having two NVR's in series. I made enquiries with the supplier who said the AUK device wouldn't work in these circumstances. As it happed I needed an NVR for another tool so I went ahead and ordered an AUK NVR switch for that purpose. Inevitably, the first thing I did was to try it on the DeWalt …. and it worked. Yes, to make the table saw work both NVR have to be set to "on". But the really interesting thing is that if one operates the table saw from that point onwards, by using the on-board Dewalt NVR, then the AUK switch stays latched-in, and therefore does not need to be reset each time the table saw is operated. The AUK switch only needs to be reset if the emergency stop button is used to kill power to the table saw. Happy days. I now need to order another AUK switch for my inverted router table. On this point, I'd just add; the real advantage with the AUK switch is the original wiring (to what ever it's attached to) remains unaltered. Therefore, if I wish to use my Triton router by hand, all I need to is detach it from it's inversion plate, unplug from the AUK NVR, and I have a hand held router seconds.

            K
            K.
            NVR Switch

            I bought this switch for use with my router which has its switch under the table and is awkward to use. Mounted on the frame I now have an excellent safety switch in easy reach.

            G
            G.J.
            NVR Switch

            A very good product, very happy with my purchase, it makes the router a far safer machine.

            W
            W.B.
            A safety switch

            I bought this switch for use with my router and table saw. Both have switches under the table and at working height are awkward to use in an emergency. I now have an excellent safety safety switch that is within easy reach and big enough to locate quickly. A really good buy for the hobbyist.

          • Shipping is FREE on orders over £85 and only £5.95 on orders under £85 within the UK Mainland, Northern Ireland, Highlands & Islands.

            Order before 2pm and we'll aim to despatch your order the same day, Monday to Friday. Please allow 1 to 2 working days for delivery.

            Read More

          You recently viewed

          Clear recently viewed

          Customer Reviews

          Based on 5 reviews
          100%
          (5)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          s
          s.j.

          I PUCHASED THIS SWITCH TO USE WITH MY DEWALT 745 TABLE SAW. AND IT WORKS JUST FINE. WHOEVER AT DEWALT WAS RESPOSIBLE FOR PUTTING THE ON / OFF SWITCH WHERE IT IS, URGENTLY NEEDS A GOOD KICK ON THE ARSE.

          T
          T.
          NVR exceeds expectations

          I wanted to add this as an additional safety feature (emergency stop button) to my DeWalt 745 table saw, but I envisaged a problem. The Dewalt is controlled through it's own NVR and I was sceptical about having two NVR's in series. I made enquiries with the supplier who said the AUK device wouldn't work in these circumstances. As it happed I needed an NVR for another tool so I went ahead and ordered an AUK NVR switch for that purpose. Inevitably, the first thing I did was to try it on the DeWalt …. and it worked. Yes, to make the table saw work both NVR have to be set to "on". But the really interesting thing is that if one operates the table saw from that point onwards, by using the on-board Dewalt NVR, then the AUK switch stays latched-in, and therefore does not need to be reset each time the table saw is operated. The AUK switch only needs to be reset if the emergency stop button is used to kill power to the table saw. Happy days. I now need to order another AUK switch for my inverted router table. On this point, I'd just add; the real advantage with the AUK switch is the original wiring (to what ever it's attached to) remains unaltered. Therefore, if I wish to use my Triton router by hand, all I need to is detach it from it's inversion plate, unplug from the AUK NVR, and I have a hand held router seconds.

          K
          K.
          NVR Switch

          I bought this switch for use with my router which has its switch under the table and is awkward to use. Mounted on the frame I now have an excellent safety switch in easy reach.

          G
          G.J.
          NVR Switch

          A very good product, very happy with my purchase, it makes the router a far safer machine.

          W
          W.B.
          A safety switch

          I bought this switch for use with my router and table saw. Both have switches under the table and at working height are awkward to use in an emergency. I now have an excellent safety safety switch that is within easy reach and big enough to locate quickly. A really good buy for the hobbyist.