×
close
Free UK delivery when you spend £45 or more | We ship worldwide - duty and tax included
sidebar:
  • Tormek RM-533 Rubber Mat

    Tormek

    £45.98

    Suitable for use with all Tormek machines. The Tormek RM-533 Rubber Mat gives you a waterproof, non-slip surface. The raised rim will retain any water spillage. 533 x 343mm. Features A waterproof and non-slip surface Raised rim helps to retain...

  • Tormek SVA-170 Axe Grinding Jig

    Tormek

    £14.98

    With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.The rotation of the stone presses the axe firmly into the jig and enhances...

  • Tormek WM-200 AngleMaster

    Tormek

    £21.98

    The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool. The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone...

  • Tormek RB-180 Rotating Base

    Tormek

    £44.98

    The RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds. Some tools are best sharpened with the stone running...

  • Tormek SP-650 Stone Grader

    Tormek

    £23.98

    With the Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an...

  • Tormek TTS-100 Turning Tool Setter

    Tormek

    £22.98

    This unique turning tool setter enables exact replication of the edge on bowl and spindle gouges as well as on flat and oval skews with a straight or a curved edge. The setter works with the Gouge Jig SVD-186 and the Multi-Jig SVS-50. The strength of...

  • Tormek T4 Sharpening System

    Tormek

    £369.98

    The Tormek T-4 incorporates new, innovative, patent pending features. Firstly, the zinc cast top incorporates the key components of the main shaft, Universal Support and motor assembly resulting in superb accuracy as standard. Secondly, the Universal...

  • Tormek SVM-140 Knife Jig

    Tormek

    £44.98

    The Tormek Long Knife Jig SVM-140 has been developed especially for the sharpening of long and flexible knives, like filleting knives. This jig works in the same way as the Knife Jig SVM-45 but is wider. Its larger width, 140 mm, stabilises a long and...

  • Tormek SVD-186 R Gouge Jig

    Tormek

    £79.98

    Use the SVD-186-R for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge. The Tormek SVD-186-R will handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to...

  • Tormek ADV-D Exchange Diamond Bit for TT-50

    Tormek

    £38.18

    Exchange diamond bit is for use with the Tormek Truing Tool TT-50.

  • Tormek SVS-38 Short Tool Jig

    Tormek

    £20.98

    This little jig is designed for sharpening short woodcarving tools and the shortest chisels. Suitable for straight shanked tools, such as wood chisels, carving gouges and tools for power carvers. The jig has two parallel flanges running on both...

  • Tormek SE-77 Square Edge Jig

    Tormek

    £54.98

    With the SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also...

  • Tormek T8 Sharpening System

    Tormek

    £639.98

    The Tormek T-8 sharpening system is the perfect answer to your sharpening requirements. For any professional or amateur needing a versatile, reliable and repeatable sharpening system, the T-8 should be on the top of your list. The T-8 has a 250mm x 50mm...

  • Tormek MB-100 Multi Base

    Tormek

    £61.98

    The Tormek MB-100 Multi Base is made specifically for the Tormek diamond-grinding wheels.  It gives you the option of sharpening, using the side of the Tormek diamond grinding wheel to produce a completely flat bevel on chisels, plane irons etc. The...

  • Tormek SVS-50 Multi Jig

    Tormek

    £51.98

    It is not without reason this jig is named 'Multi Jig'. It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one. With SVS-50 you can sharpen square and...

Featured Brands

brands-1
brands-2
brands-3
brands-4
brands-5
brands-6
to top