Sale

INCRA Build-It Hold Down Clamp locks your workpiece in place for consistent, safe cutting results. Works with any T-Track and INCRA’s New Build-It T-Slot Panel Connector. The perfect accessory to the Build-It System family of tools. These specially...

The protractor plate's exclusive AngleLOCK Indexing System has a whopping 180 can't-miss angle stops in 1-degree increments with special stops located at 22.5 degrees. The HD stands for High Definition and is the most refined model yet in the Miter...

INCRA CleanSweep dust collection cabinet attaches to the underside of laminated MDF or phenolic router tables to grab sawdust where it's produced on your router table The vacuum generated inside the cabinet by your 4" dust collection hose pulls...

INCRA's marking protractor has micro fine guide holes at every 45°, 30°, 22.5°, 5°, 1° and 0.5° intervals to plot any angle with ease and absolute accuracy. A metal T-bar and see through crosshairs provide exact alignment against the edge of your...

INCRA Rule Set offers unparalleled accuracy, having patented marking holes to mark in rather than just etched graduations, these rules allow you to mark out precisely with no risk of error. Comprising of: Precision Marking Rule 300mm Precision Bend...

Replacement wheel for Veritas gauges. A hardened steel wheel cutter which scribes perfectly at any point of its circumference and also avoids pin chatter.

INCRA Mast-R-Lift II is a substantial lift that features a very high level of accuracy to a 50th of a millimetre. The benefit of this Lift is that you get the sublime engineering of JessEm coupled with the addition of INCRA’s MagnaLOCK Insert Rings and...

The best tool available for quick and accurate marking of dovetails. Supplied as a pair, a 1:6 for softwoods and a 1:8 for hardwoods. Both are 50mm(2") x 50mm(2") and made from anodised aluminium. The inside edges have an engineer's corner to ensure...

INCRA HingeCrafter makes beautiful accurate wooden hinges by combining your INCRA Positioner or I-Box Jig with the HingeCrafter drill guide and the results will be beautiful wooden hinges ready to glue right  into your project.  So you’ve designed and...

The Veritas Dovetail Saddle Marker 1:8 is precisely machined tool with the traditional 1:8 angle.  Designed with long legs to ensure accurate registration on the workpiece.  The saddle enables you to mark a continuous line around a corner. Both straight...

Veritas Shaft Clamp for Dual Marking Gauge is used to lock the relative position of the two rods on the Veritas Dual Marking Gauge, when a project requires a constant mortice size, but different offsets. The shaft clamp lets you lock the relative...

Wooden handle for Veritas Front and Tail Vices. Length of handle 310mm x 30mm diameter

NAREX cabinetmaker’s chisels have an improved cross-section from previous designs. The sides are ground thin to minimise friction when cutting which is particularly useful for dovetail work. The blade is forged from Chrome Manganese (Cr-Mn) steel and...

The Veritas Wheel Marking Gauge has a hardened steel wheel cutter which scribes perfectly at any point of its circumference and also avoids pin chatter. There are two main problems with a typical marking gauge: you have to tilt it just right to avoid...

Traditionally used for the trimming of plugs and dowels flush with a surface, this flush cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. The Japanese tooth pattern blade cuts...