×
close
Free UK delivery when you spend £75 or more | We ship worldwide - duty and tax included
Saws

Saws

Saws

Peter Sefton’s tool shop started when Peter’s students reviewed ten of the best saws from around the world. The clear winners were Sheffield’s Thomas Flinn Pax 1776 saws which are still hand filed and made to order the traditional way, along with the exceptional value über-styled Veritas for those who prefer a lighter saw to use. We have the experience to guide you through your choice of dovetail or tenon saws in either rip or crosscut tooth patterns.

Dovetail Saws5

Although similar to a tenon saw, dovetail saws generally have thinner blades with a greater number of teeth per inch. Dovetail saws are primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints. Available in both rip and cross cut configurations our range of saws from Thomas Flinn, Pax and Veritas are some of the best we have tested.

Dovetail Saws
Flush Cut Saws4

A flush cut saw is generally used to cut off exposed dowels, rods and tenons. This type of saw has a flexible blade and teeth that only cut on the pull stroke. Available from Thomas Flinn Pax in a single sided blade or from Veritas as a double-edged set saw.

Flush Cut Saws
Japanese Saws2

Unlike most European saws that cut on the push stroke, Japanese saws are the best known for cutting on the pull stroke.  Generally known for being used in Japanese woodworking but they are also used a lot in Asian and Middle Eastern countries. Our stock from Tajima features a Japanese pull stroke blade with a European style pistol grip handle.

Japanese Saws
Saw Accessories1

Our saw accessories are all you need for caring for your saw, getting the correct angle to re-sharpen the teeth of your saw is a skill in itself, take the guesswork out of this with the Saw File Holder from Veritas.

Saw Accessories
Tenon Saws5

As the name suggests tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. As standard a tenon saw will have between 10 and 15 teeth per inch and be available in rip or crosscut tooth configuration. Our range of Thomas Flinn Pax and Veritas have a saw to suit all requirements.

Tenon Saws
sidebar:
  • Tajima Japanese Pull Saw Blade - 21 tpi

    Tajima

    £10.19

    The Tajima Japanese pull saw blade measures 250mm in length with an extra-fine 21 tpi cut. The flexible blade design allows for a flush cut on the horizontal and the Japanese style blades are designed to cut faster than normal blades. The triple-edge...

  • Tajima Japanese Pull Saw with Pistol Grip - 16 tpi

    Tajima

    £34.96

    The Tajima Japanese Pull Saw with Pistol Grip is equipped as standard with the GNB-265 Fine Cut blade. This blade is 0.6 mm thick with a medium-fine crosscut tooth set at a pitch of 1.75 mm. The blade of the saw is housed in a precision-machined...

  • Veritas Crosscut Carcass Saw - 14 tpi

    Veritas

    £80.28

    The Veritas Crosscut Carcass Saw has great balance, cuts easily, stays true and has a comfortable and secure grip.  The saw measures 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 14 tpi. The teeth have a rake angle of...

  • Pax 1776 Tenon Saw - Rip 12" 13 tpi

    Thomas Flinn

    £155.95

    New and improved!The Pax 1776 Saw, Thomas Flinn’s finest saw and a must have for all woodworking enthusiasts and is our flagship saw. Made with a heavily folded brass back roll marked with 'Pax 1776 Sheffield England', it is made as a celebration piece...

  • Veritas Rip Cut Carcass Saw - 12 tpi

    Veritas

    £80.28

    The Veritas Rip Cut Carcass Saw has great balance, cuts easily, stays true and has a comfortable and secure grip. The saw measures 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12 tpi. The teeth have a rake angle of 10...

  • Pax 1776 Tenon Saw - Crosscut 12" 13 tpi

    Thomas Flinn

    £155.95

    New and improved!The Pax 1776 Saw, Thomas Flinn’s finest saw and a must have for all woodworking enthusiasts and is our flagship saw. Made with a heavily folded brass back roll marked with 'Pax 1776 Sheffield England', it is made as a celebration piece...

  • Pax 1776 Tenon Saw - Rip 10" 15 tpi

    Thomas Flinn

    £149.95

    New and improved!The Pax 1776 Saw, Thomas Flinn’s finest saw and a must have for all woodworking enthusiasts and is our flagship saw. Made with a heavily folded brass back roll marked with 'Pax 1776 Sheffield England', it is made as a celebration piece...

  • Veritas Saw File Holder

    Veritas

    £38.58

    This well designed guide helps you accurately control the angle of the file as you sharpen. It has a rotating collar for setting a positive or negative rake angle up to 30 degree. The 75mm wide protractor helps set the fleam (or bevel) angle up to 45°...

  • Veritas detail Flush Cutting Saw - 26 tpi

    Veritas

    £21.98

    Traditionally used for the trimming of plugs and dowels flush with a surface, this flush cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. The Japanese tooth pattern blade cuts...

  • Veritas Double Edged Flush Cutting Saw - 22 tpi

    Veritas

    £23.68

    Traditionally used for the trimming of plugs and dowels flush with a surface, this flush cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. The Japanese tooth pattern blade cuts...

  • Pax Flexible Flush Cutting Saw - 6" 20tpi

    Thomas Flinn

    £16.96

    The Pax Flexible Flush Cutting Saw has a very flexible alloy steel bade which cuts on the pull stroke. As it has no set, this saw is excellent for use in cutting dowels etc. as you can get the saw right to the edge and leave a very smooth surface. The...

  • Veritas Trammel Points

    Veritas

    £24.68

    Veritas Trammel Points are made of stainless steel for durability and corrosion resistance. The removable points score clear lines on any wood and are also effective on aluminium, brass, bronze and mild steel. Knurled sections make the tips easier to...

  • Pax 1776 Dovetail Saw - Crosscut 10" 20 tpi

    Thomas Flinn

    £149.95

    New and improved!The Pax 1776 Saw, Thomas Flinn’s finest saw and a must have for all woodworking enthusiasts and is our flagship saw. Made with a heavily folded brass back roll marked with 'Pax 1776 Sheffield England', it is made as a celebration piece...

  • Veritas Crosscut Dovetail Saw - 16 tpi

    Veritas

    £67.98

    The Veritas Crosscut Dovetail Saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. The saw has a 235mm (9.1/4") long by 0.5mm thick high-carbon steel blade filed with 16 teeth per...

  • Veritas Fine-Tooth Dovetail Saw - 20 tpi

    Veritas

    £67.98

    The Veritas Fine-Tooth Dovetail Saw has great balance, cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. This fine tooth saw has a 235mm (9.1/4") long by 0.5mm thick high-carbon steel blade. The teeth...

Featured Brands

brands-1
brands-2
brands-3
brands-4
brands-5
brands-6
to top