The WoodRiver® V3 range of hand planes is based on the reliable Stanley Bedrock design featuring heavy, stress-relieved ductile iron castings, fully machined adjustable frogs without the removal of the T10 steel blade which are water quenched carbon steel hardened to RC63.
Some of the features on the V3 plane include a new larger adjusting wheel which is 4mm bigger in diameter than previously seen. This gives more leverage making it easier to adjust and is helpful because another new feature is the improved Y lever or Yoke. The old style Y lever is wedge shaped and could jam on the chip breaker when being adjusted. Rob Cosman has been working with Woodcraft on the design improvements that we can now see.
Corrosion can deface a plane pretty quick and if left unchecked, ruin it. WoodRiver Plane Sacks can help! Our plane sacks are long with enough widt...
View full details
Corrosion can deface a plane pretty quick and if left unchecked, ruin it. WoodRiver Plane Sacks can help! Our plane sacks are long with enough widt...
View full details
Corrosion can deface a plane pretty quick and if left unchecked, ruin it. WoodRiver Plane Sacks can help! Our plane sacks are long with enough widt...
View full details
Corrosion can deface a plane pretty quick and if left unchecked, ruin it. WoodRiver Plane Sacks can help! Our plane sacks are long with enough widt...
View full details
Sale
WoodRiver silicone bench mats are the perfect accessory for your bench top. Silicone resists most types of glue and finishes that woodworkers use, ...
View full details
Sale
WoodRiver silicone bench mats are the perfect accessory for your bench top Silicone resists most types of glue and finishes that woodworkers use, s...
View full details
Sale
WoodRiver T-Bolts are a standard “toilet bolt” design, the 1/4"-20tpi bolts will slide easily into the small T-Slot groove (5/8" wide x 3/16" high...
View full details
Sale
WoodRiver T-Bolts are a standard “toilet bolt” design, the 1/4"-20tpi bolts will slide easily into the small T-Slot groove (5/8" wide x 3/16" high...
View full details
Sale
WoodRiver T-Bolts are a standard “toilet bolt” design, the 1/4"-20tpi bolts will slide easily into the small T-Slot groove (5/8" wide x 3/16" high...
View full details
Edge Guards or Tip Protectors are made from a somewhat hard plastic that either fits well because it is made for the chisel or it doesn’t fit and ...
View full details
Beautifully crafted, well balanced 4 piece butt chisel set. CRV steel blades hardened to RC59-63 with steel ferrules and nicely finished off with g...
View full details
The long and the short of it - literally. Made in the same factory as our hand planes, these screwdrivers are fitted with beautiful bubinga handles...
View full details
Made in the same factory as our hand planes, these screwdrivers are fitted with beautiful bubinga handles and CRV polished steel ferrules and blade...
View full details
Sale
The long and the short of it - literally. Made in the same factory as our hand planes, these screwdrivers are fitted with beautiful bubinga handles...
View full details
WoodRiver wheel marking gauge has a precision ground brass fence, graded stainless steel shaft and a finely honed blade. The 7" long replaceable bl...
View full details
Replacement Wheel for the WoodRiver Marking gauge. Marking gauge not included - Image for illustrative purposes only
A 25° high carbon tool steel replacement plane irons for the WoodRiver® Standard and Low Angle Block Planes. High carbon tool steel Pre-sharpened ...
View full details
WoodRiver 2" Plane Iron (No.4 & No.5) This 2" or 50mm wide WoodRiver plane blade will fit No.4 and No.5 planes. The 3mm or 1/8" thick blade is ...
View full details
Awls make holes, usually to start screws in wood or push thread or lace through leather. The WoodRiver Max Awl is an elegant, beautiful interpretat...
View full details
The WoodRiver Burnisher is just the tool to turn the edge on your favourite scraper or any scraper if you're just starting out. Our burnisher featu...
View full details
T-Style Knob, phenolic with 2" stud. Thread Size 1/4"-20tpi 2" stud
The WoodRiver No. 91 is the result of over two years of extensive prototyping and testing to develop a classic look for a plane that works as good...
View full details
WoodRiver No. 92 is the result of two years of extensive prototyping and testing to develop a classic look for a plane that works as good as it lo...
View full details
The WoodRiver No. 93 is the result of over two years of extensive prototyping and testing to develop a classic look for a plane that works as good ...
View full details