If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
A pair of heavy-duty cast-iron legs made perfectly for the Harvey T-40 Woodturning Lathe. They are designed to reduce vibration and give excellent stability by spreading the footprint to a depth of 600mm.
Harvey
The T-40 14” x 24” benchtop lathe incorporates an Industrial Servo Motor, commonly used on metal working lathes for its powerful torque, which allows the T-40 huge torque at low speeds. The spindle...
Harvey
Outboard turning is achieved by rotating the headstock side of the lathe through 90 degrees so that the bed of the lathe no longer restricts the maximum diameter. Consisting of machined steel...
Harvey
This solid cast iron piece is machined and ground, similar to the T-40 Woodturning Lathe bed. With the extension bed fitted, the spindle turning capacity is increased by 75% to 1067mm (42″).
INCRA
Incra Lexan Scales for the Build-It System, T-Track, Mitre Guides and Jigs. Available in the following scales: PSCA-0041M - Lexan Scale, 0-41cm (0cm on the left, 41cm on the...
AUK Tools
Scary Sharp lapping film provides a quick cutting, long-lasting and very flat sharpening method. These aluminium oxide micro finishing sheets are easy to lay with a strong polyester film...
