If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
The Centering Scale Fence allows the workpiece to be easily centered on the table. You simply measure the workpiece then set the width on the scale. The scale is only half the actual dimension so the piece is auto-centered without having to find centre using more complicated means.
The Centering Scale Fence has both a metric scale and an inch scale.
PantoRouter
The PantoRouter Auxiliary Fence has long slots to allow positioning on the table at any angle. Use the Auxiliary Fence combined with the tilting table on the PantoRouter to achieve compound...
PantoRouter
The PantoRouter Fence Stops are the perfect addition for positioning your workpiece on the machined table top. Just slide the oval nut into the tracks and tighten the lever.
PantoRouter
The PantoRouter V3 Template Holder is backwards compatible to all PantoRouters since 2014. The holder is precision milled for perfect alignment and repeatability. The centring holes make setup...
PantoRouter
The Dowel Templates have the same outside taper as the PantoRouter Mortise and Tenon Template Pack so the same bit and guide bearing combinations can be used to make perfectly fitting round...
PantoRouter
Box Joint template for PantoRouter is a box joint (finger joint) template used to make 6mm or 12mm wide fingers. Using the bearing guide follow the template to create precision joints every...
PantoRouter
This Mortise and Tenon Template Pack is a set of seven mortise and tenon templates. Five horizontal templates can make 1” (25.4mm), 1.5” (38.1mm), 2” (50.8mm), 2.5” (63.5mm) and 3” mortise and...
