Skip to content
Due to the current COVID-19 situation deliveries may take longer than normal, click here for the latest update.
Due to the current COVID-19 situation deliveries may take longer than normal, click here for the latest update.

AUKTools 2400W Fixed Base Router Remote Speed Control and NVR

by AUK Tools

This industrial quality 2400W (3.25HP) motor produced exclusively for Wood Workers Workshop to run on a UK and European 230V power supply offers variable speed control between 10,000 to 22,000 RPM with premium SKF bearings for extended life and minimal cutter vibration. The quiet running high torque motor tackles the most demanding of timbers with ease for safe and reliable router table work. With a unique pre-wired variable speed remote control unit, isolator and NVR (No Volt Release) switch. 

This fixed base router is fully compatible with American style router lift systems including INCRA and JessEm Mast-R-Lift II, therefore allowing for precise and easy adjustment of cutter height without any cutter length loss below the table. The motor shaft and auto-release collet raises above the table for easy cutter change with the supplied spanners. The soft-start variable speed control is sealed for reliability in the hard-working environment of a router table or CNC machine and is engineered to maintain constant speed under load.

This router is designed specifically for use with router lifts and CNC machines that require a 106mm (4.2") - diameter router. AUKTools fixed base router is not to be used freehand.

Metric collets also available in 6mm, 8mm and 12mm.

Safety First!

  • Take control - no more scrambling under the table trying to find the controls for your router - operate the router's on/off switch and variable speed smoothly and safely from your remote control unit
  • NVR switch - this means that if you suffer power loss, your router will not restart until you manually switch it back on
  • The emergency stop button locks on and can only be released when you physically twist to unlock it - allowing you to isolate your router whilst you change cutters

Easy to Use

  • Locate your remote controller unit wherever suits you - on the wall or on the side of your router table
  • Plenty of cable to play with - 1.3 metres between the router and the remote controller unit, plus 2.8 metres between the remote controller unit and the power supply
  • Particularly useful to owners of the INCRA Clean Sweep box and Insert Rings as the fully enclosed router is now controllable outside the box


  • AUKTools Fixed Base Router
  • Pre-wired remote speed controller unit, isolator and NVR
  • 1/2" and 1/4" collets
  • Offset collet wrenches
  • Spare set of brushes
  • Owner's manual


  • Voltage: 230V 50Hz
  • Power Input: 2400W (3.25HP)
  • Power Output: 1800W (2.4HP)
  • No Load Speed: 10,000-22,000 RPM
  • Soft start quiet running motor
  • Current overload motor protection
  • Cable Length: 1M
  • Plug Format: Three-pin
  • Weight: 10lbs

    Save money with one of our lift package deals:

    FREE UK Delivery on all orders over £40 within the UK Mainland, Northern Ireland, Highlands & Islands. Only £4.50 on orders under £40.

    Order before 2pm and we'll aim to despatch your order the same day, Monday to Friday. Please allow 1 to 2 working days for delivery. For the lastest COVID-19 delivery information please click here.

    We are Shipping to the EU

    Click here to find out more about changes to VAT / import taxes


    Customer Reviews

    Based on 35 reviews
    Stan Keeler
    good router

    Easy to install in Jessem router lift. Smooth running and a substantial router. So much easier to use being able to change bits using the two spanners.
    Fast efficient service from the supplier, Wood Workers Workshop.

    Rune Hovelsen
    Superb router

    Good service and I had the router after 1 week

    David Harper
    Like it a lot

    Not been able to use it yet, still waiting for my incra masterlift II also on order from WW, have switched the router on and played with remote speed controller which is brilliant. The motor seems much quieter than either my RP2301 or DW625 that I had in my previous router table setup. Looking forward to the ease of bit changes etc when using this setup v/s the old plunge router and not having to use such a long collet extension which I've always thought was the weak link, spinning at 300 times a second.
    First order with WW and they didn't disappoint, good packaging and arrived quickly.

    Gordon Turnbull
    Very Satisfied

    My AUK Tools V3 WM1800 EU/AU 1800w Fixed Base Router Motor and Prewired Remote Speed Controller unit, Isolator and NVR were delivered promptly and in perfect condition. The installation of the router motor in my Mast-R-Lift II incorporated in a CLEAN SWEEP cabinet mounted in an 'Enclosed' Incra Router Table Stand was straightforward but did require the table top to be removed to thread though the cables. It is a real pleasure to be able to change the collets / bits and the speed without bending down, opening the CLEEN SWEEP door ( and risking leaving it open ) fumbling under the table to find the speed control or the spindle lock. My only adverse comment is that the web site specification does not make it clear that the output power is 2.4HP ( 1.8KW) and the input power is 3.25HP (2.4 KW) which is stated in the owners manual provided

    Powerful and convenient for a router lift

    While I haven't had to the chance to put it to full use, what I have done with it hasn't taxed the machine at all. The remote controls are a must if you are on a router table with a dust box (Incra Mast-R-Lift and Cleansweep box). This fits perfectly and the fact that I don't need to access the machine takes all of the bending and reaching out of the picture. Faster for smaller bits...turn the dial, slower for larger bits...turn the dial. All VERY convenient. So pleased I will continue to use the 220v tool upon my return to the US from Europe.