If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Veritas Shaft Clamp for Dual Marking Gauge is used to lock the relative position of the two rods on the Veritas Dual Marking Gauge, when a project requires a constant mortice size, but different offsets.
The shaft clamp lets you lock the relative position of the cutters while still being able to adjust the fence for offset. This allows you to preserve identical mortice or tenon sizing when joining parts of different Gauge thicknesses or when adding a reveal, since it prevents the cutter settings from shifting while the fence is being repositioned.
Machined to precise tolerances to prevent binding on the rods, the 13mm long collar is made from extruded aluminium, with a turned brass thumbscrew that tightens onto the marking gauge's steel guide rods without marring their surfaces.
AUK Tools
Mark perfect joints every time. The extra-sharp replaceable cutter is hardened and marks a keen accurate line, preventing grain tear out during material scribing. One-hand easy-set design requires no...
Joseph Marples
These marking gauges are being made exclusively for us by Joseph Marples of Sheffield. They are being made with a Shortened stem only 8mm above the marking pin, this enables them to be used inside...
iGaging
The iGaging Wheel Marking Gauge allows you to make perfect hairline layout marks both with and across the wood grain. The single-bevel edge wheel cutters avoid the problems of wandering that can...
Veritas
Veritas Front Vices have rugged, machined, double guide rods and single-lead Acme screws. Available in regular and large sizes. The regular front vice is 175mm (7") x 375mm (14.75") overall with a...
