If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Woodpeckers Hook Stop is a simple hook that attaches to Woodpeckers Woodworking Rules - imagine being 2 or 3 feet away from the zero end of the ruler, rather than stretching to try and keep the zero end flush with the board's edge, you can simply hook that end onto the board and away you go.
Hook rulers have been around for ages. They're advantage is the ability to quickly and exactly reference the starting edge of a board
The Hook Stop is especially helpful when working with longer rulers. Simple and effective. Like all Woodpeckers tools.
The Hook Stop is not compatible with older Woodworking Rules as well as any vintage 6". The way to know is to look at the top for two threaded holes located at 1/4" and 3/4". If the threaded holes are there than the Hook Stop will attach. Rulers purchased after 2011, should have the holes in them.
Woodpeckers
The Woodpeckers 600mm Woodworking Rule a superior heavy-duty rule with accurate laser engraved markings on a 30 degree bevel; it also has a standard and a centre scale, plus it...
Woodpeckers
Woodpeckers woodworking rules are a superior heavy-duty rule with accurate laser engraved markings on a 30 degree bevel; it also has a standard and a centre scale, plus it sits flat. What...
Woodpeckers
Woodpeckers woodworking rules are a superior heavy-duty rule with accurate laser engraved markings on a 30 degree bevel; it also has a standard and a centre scale, plus it sits...
Woodpeckers
The Woodpeckers 900mm Woodworking Rule is a superior heavy-duty rule with accurate laser engraved markings on a 30 degree bevel; it also has a standard and a centre scale, plus it sits flat...
Woodpeckers
The Woodpeckers Woodworking Rules are superior heavy-duty rules with accurate laser engraved markings on a 30 degree bevel; it also has a standard and a centre scale, plus it sits flat. Woodpeckers...
Woodpeckers
When doing layout work on the narrow edge of stock, most typical woodworking rules are a little awkward. They usually need to be aligned to the face of your stock, but they're wider than the edge...
