If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Woodpeckers MortiseMatch does the same thing for the Festool Domino joiner that a router table does for a router, by turning a hand-held power tool into a precision stationary machine. Your Domino mounts to the MortiseMatch and you bring your work to it, instead of taking the Domino to your work. MortiseMatch simplifies working on small stock, keeps your work better aligned to the cutter, and speeds up the mortising process. Mounting takes just seconds, using two machine screws that thread into holes already in the base of your Domino (both DF 500 and XL DF 700 models).
In normal, hand-held use, 10mm is the fixed distance from the base of the Domino to the centre of the mortise. The MortiseMatch carriage puts your Domino on a platform that adjusts below the table, taking your minimum centre down to 6mm. That means you can put Dominos in the centre of stock as thin as 12mm and reference from a large, flat table surface. Conversely, the carriage can position the mortise 30mm from the table, allowing you to centre on stock 60mm thick, even with the smaller DF-500 Domino. Throughout that range, the Domino always remains parallel with the table surface and two knobs lock it wherever you want.
Woodpeckers MortiseMatch has been engineered to work hand-in-hand with the Domino Joiners. The slots in the table top are sized perfectly for track clamps. If you already have track clamps that work with your other Festool tables and tracks, they’ll work with MortiseMatch. The MortiseMatch carriage attaches simply to the Domino, and if you need to use it hand-held while you're in the middle of a project, it isn't even necessary to completely remove the carriage from the Domino, just pop out one screw and the assembly comes off and is ready to use with the Domino fence.
If you're a Domino user, or have been thinking about becoming a Domino user, Woodpeckers MortiseMatch completes your setup, simplifying joint alignment, increasing the range of material thickness, working with narrow material both square and mitred, and taking the weight of the machine off your hands during long production runs.
Please Note: Images are for illustrative purposes only. Festool Domino Machine shown is not included
Woodpeckers
Woodpeckers Hold Down Clamp is by far one of the easiest ways to clamp wood along a T-Track and has more capacity than most surface-mount toggle clamps. Better than other hold-down clamps, the...
Woodpeckers
The Woodpeckers 900mm Woodworking Rule is a superior heavy-duty rule with accurate laser engraved markings on a 30 degree bevel; it also has a standard and a centre scale, plus it sits flat...
Woodpeckers
The Woodpeckers Woodworking Rules are superior heavy-duty rules with accurate laser engraved markings on a 30 degree bevel; it also has a standard and a centre scale, plus it sits flat. Woodpeckers...
Woodpeckers
When doing layout work on the narrow edge of stock, most typical woodworking rules are a little awkward. They usually need to be aligned to the face of your stock, but they're wider than the edge...
Woodpeckers
Woodpeckers Hook Stop is a simple hook that attaches to Woodpeckers Woodworking Rules - imagine being 2 or 3 feet away from the zero end of the ruler, rather than stretching to try and...
Woodpeckers
Woodpeckers Story Stick Pro Caliper Arms allow you to quickly create a physical "stick" to use as a cut-to reference on your Story Stick Pro. The Caliper Arms are offset to the inside from one...
