INCRA Combo #3 Router Table with LS25 Upgrade (Metric)

INC_RTCOMBO3+
by INCRA
£899.95

Only available "To Order" - Please Call or Email for availability

INCRA Combo #3 Router Table with LS25 Upgrade (Metric) is our best selling Combo, combining the versatility of the LS25 Super System with the extra work space and storage space of the 43" Offset Router Table Top and matching stand.

Upgrade to the convenience of an INCRA Mast-R-Lift and enclose the stand into a cabinet using the provided panel channels, and you then have the ultimate in routing performance and convenience. This is a system that can handle EVERY fence-guided routing operation from the most basic shaping and edge-forming to the most advanced decorative joinery imaginable.

The locking base housing of the LS Positioner is slotted to allow it to be cleanly mounted within the perimeter of the 27" x 43" router table.

Don't forget to add a Wheel Kit if you need your equipment to be mobile in a small shop.

Includes

  • 25" (635mm) Range LS Positioner (Metric)
  • INCRA Wonder Fence
  • INCRA Shop Stop
  • Jumbo Right Angle Fixture
  • 27" x 43" (685mm x 1092mm) Offset Router Table Top
  • 43" (1092mm) Router Table Stand
  • Master Reference Guide & 25 Joinery Templates (Metric)
  • LS Instructional DVD

* Don't forget to order the outstanding MagnaLOCK Aluminum Router Mounting Plate (not included) or you can also upgrade to an INCRA Mast-R-Lift-II or PRL-V2 Router Lift for the ultimate in convenience *

    INCRA Aluminum MagnaLOCK Plate Compatibility Chart

    INCRA MagnaLOCK Plates are available in 10 different mounting hole patterns to fit most popular routers. For less common routers, we have undrilled plates available, which you may drill with any custom mounting hole pattern.

    • Reviews
    • Shipping
    • Customer Reviews

      Based on 5 reviews
      100%
      (5)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      D
      D.M.
      Stable Table

      The INCRA Combo #3 router table is a top quality table, engineered to an amazing standard. Well worth every penny.

      P
      P.C.
      What a piece of Kit

      This INCRA Combo #3 has replaced my home made table and fence, I only wish I had been aware of the INCRA
      band before, it would have saved me time and money.
      The equipment is easy to assemble, well engineered, good quality, with a very well presented technical manual and reference guide.
      it is obvious a lot of effort has been put into the design to ensure operator satisfaction.
      I am relatively new to woodworking and found to my cost, accuracy is of the utmost importance and the INCRA Combo #3 gives me that.
      Thank you

      C
      C.A.
      Fantastic piece of kit

      I’ve had the AUK Router and INCRA mast-R-lift II for a little while and found that the only thing that let me down was my old table, so I brought this and instantly found the quality of the build was exceptional and the accuracy of my work increased a hundredfold. I’m not a master craftsman, having only gotten back into the hobby after near 30 years, but the quality of my pieces has improved significantly thanks to this system.
      I’d have no problem in recommending this set up to anyone.
      I also have to say a very big thanks to Nicki at Woodworkers for helping to sort the problem I had with the delivery company, she was on the issue from ‘go’ had a solution sorted. Cannot thank her enough, great service.

      K
      K.S.
      amazing engineering

      Really impressed with the build quality of the Incra table and positioner. There is no play at all in the fence once set up and I cant wait to start creating with the vast amount of templates that come with the kit.
      The instructional DVD is really helpful, taking you through the set up in clear manageable stages. I took a laptop into the workshop and played each section whilst following along and had some great results, much better than I was expecting for a first try. Fantastic accuracy and great fun.

      The table and frame once fixed is pretty solid and easily moved around the workshop, and could be easily utilised as a great storage space with some ply shelving /drawers.

      Overall really pleased with my purchase, just a little careful set-up and the Incra has provided some great woodworking possibilities.

      Thank you Woodworkers Workshop

      K
      K.C.
      A MUST FOR ANY WOODWORKER

      Wow what can I say about this.... I have had many router tables from all different makers over the years and was always disappointed with the accuracy they delivered, not with this the quality is excellent with high precision made parts for true accuracy in all your routing needs.
      The LS system has to be one of the best fence systems I have ever used along with the wonder fence this really is a perfect combination and I am looking forward to start using the template guides that come with the system for making various dove tail combinations, the DVD included has a running time of 120 minutes and shows the capabilities of what this machine can do.
      I have the wheel kit fitted to the stand and have now started to box in the stand to include draws for all my router cutters, it will be nice too have them all in one place and at hand.
      The top is of very high quality and has a nice surface finish and is true and flat and I would recommend this over cast iron
      I also have the router lift fitted by jessem along with the AUK router with separate NVR switch and speed control.
      The only issue I have is the cable for the AUK router is a bit too thick for the plastic grommet on the clean sweep box, but this is minor as this can not be seen from the front .
      So I would highly recommend this product to any body who is looking for a top quality router table setup and I would not hesitate too recommend WOODWORKERSWORKSHOP to anybody out there, all my questions were answered and nothing was too much trouble.
      So I would also like to thank Jim and Peter for all their assistance and look forward to future purchases.

    • FREE UK Delivery on all orders over £30 within the UK Mainland, Northern Ireland, Highlands & Islands, for a limited time only*. Only £5.95 on orders under £30.

      Order before 2pm and we'll aim to despatch your order the same day, Monday to Friday. Please allow 1 to 2 working days for delivery.

      Read More

    You recently viewed

    Clear recently viewed

    Customer Reviews

    Based on 5 reviews
    100%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    D.M.
    Stable Table

    The INCRA Combo #3 router table is a top quality table, engineered to an amazing standard. Well worth every penny.

    P
    P.C.
    What a piece of Kit

    This INCRA Combo #3 has replaced my home made table and fence, I only wish I had been aware of the INCRA
    band before, it would have saved me time and money.
    The equipment is easy to assemble, well engineered, good quality, with a very well presented technical manual and reference guide.
    it is obvious a lot of effort has been put into the design to ensure operator satisfaction.
    I am relatively new to woodworking and found to my cost, accuracy is of the utmost importance and the INCRA Combo #3 gives me that.
    Thank you

    C
    C.A.
    Fantastic piece of kit

    I’ve had the AUK Router and INCRA mast-R-lift II for a little while and found that the only thing that let me down was my old table, so I brought this and instantly found the quality of the build was exceptional and the accuracy of my work increased a hundredfold. I’m not a master craftsman, having only gotten back into the hobby after near 30 years, but the quality of my pieces has improved significantly thanks to this system.
    I’d have no problem in recommending this set up to anyone.
    I also have to say a very big thanks to Nicki at Woodworkers for helping to sort the problem I had with the delivery company, she was on the issue from ‘go’ had a solution sorted. Cannot thank her enough, great service.

    K
    K.S.
    amazing engineering

    Really impressed with the build quality of the Incra table and positioner. There is no play at all in the fence once set up and I cant wait to start creating with the vast amount of templates that come with the kit.
    The instructional DVD is really helpful, taking you through the set up in clear manageable stages. I took a laptop into the workshop and played each section whilst following along and had some great results, much better than I was expecting for a first try. Fantastic accuracy and great fun.

    The table and frame once fixed is pretty solid and easily moved around the workshop, and could be easily utilised as a great storage space with some ply shelving /drawers.

    Overall really pleased with my purchase, just a little careful set-up and the Incra has provided some great woodworking possibilities.

    Thank you Woodworkers Workshop

    K
    K.C.
    A MUST FOR ANY WOODWORKER

    Wow what can I say about this.... I have had many router tables from all different makers over the years and was always disappointed with the accuracy they delivered, not with this the quality is excellent with high precision made parts for true accuracy in all your routing needs.
    The LS system has to be one of the best fence systems I have ever used along with the wonder fence this really is a perfect combination and I am looking forward to start using the template guides that come with the system for making various dove tail combinations, the DVD included has a running time of 120 minutes and shows the capabilities of what this machine can do.
    I have the wheel kit fitted to the stand and have now started to box in the stand to include draws for all my router cutters, it will be nice too have them all in one place and at hand.
    The top is of very high quality and has a nice surface finish and is true and flat and I would recommend this over cast iron
    I also have the router lift fitted by jessem along with the AUK router with separate NVR switch and speed control.
    The only issue I have is the cable for the AUK router is a bit too thick for the plastic grommet on the clean sweep box, but this is minor as this can not be seen from the front .
    So I would highly recommend this product to any body who is looking for a top quality router table setup and I would not hesitate too recommend WOODWORKERSWORKSHOP to anybody out there, all my questions were answered and nothing was too much trouble.
    So I would also like to thank Jim and Peter for all their assistance and look forward to future purchases.