PantoRouter Accessories

The PantoRouter Auxiliary Fence has long slots to allow positioning on the table at any angle. Use the Auxiliary Fence combined with the tilting table on the PantoRouter to achieve compound angles in minutes. The T-Slot on the edge can be used for...

This Mortise and Tenon Template Pack is a set of seven mortise and tenon templates. Five horizontal templates can make 1” (25.4mm), 1.5” (38.1mm), 2” (50.8mm), 2.5” (63.5mm) and 3” mortise and tenon. Two vertical...

Designed and made for the PantoRouter, this solid carbide up-cut spiral cutter is a perfect partner to the Mafell FM1000 router spindle motor. Precision made to make exact joints off the PantoRouter every time. Specification 8mm shank 10mm cutting...

The Centering Scale Fence allows the workpiece to be easily centered on the table. You simply measure the workpiece then set the width on the scale. The scale is only half the actual dimension so the piece is auto-centered without having to...

The PantoRouter Dust Collection Hood enhances the operation and user experience of the PantoRouter. It installs with the supplied hardware in just a few minutes and is compatible with all Hybrid PantoRouters. The brush head moves to create a collar...

The PantoRouter Fence Stops are the perfect addition for positioning your workpiece on the machined table top. Just slide the oval nut into the tracks and tighten the lever.

Designed and made for the PantoRouter, this solid carbide up-cut spiral cutter is a perfect partner to the Mafell FM1000 router spindle motor.  Precision made to make exact joints off the PantoRouter every time. Specification 8mm shank 8mm cutting...

For use with the PantoRouter, this dovetail cutter is a perfect partner to the Mafell FM1000 router spindle motor. Precision made to make exact joints off the PantoRouter every time. Specification 1/4" shank 12.7mm cutting diameter (1/2") 22.0mm cutting...

The Dowel Templates have the same outside taper as the PantoRouter Mortise and Tenon Template Pack so the same bit and guide bearing combinations can be used to make perfectly fitting round mortise and tenons, holes and dowels. Make your own dowels in...

Box Joint template for PantoRouter is a box joint (finger joint) template used to make 6mm or 12mm wide fingers. Using the bearing guide follow the template to create precision joints every time. Accurate, Repeatable, Fast!

Designed and made for the PantoRouter, this solid carbide up-cut spiral cutter is a perfect partner to the Mafell FM1000 router spindle motor.  Precision made to make exact joints off the PantoRouter every time. Specification 8mm shank 12mm cutting...

The Variable Spaced Dovetail template set of 5 is used to make 8° dovetail joints on the PantoRouter. The template is mounted on the V3 template holder with the supplied hardware. You will also need...PantoRouter Dovetail...

The PantoRouter V3 Template Holder is backwards compatible to all PantoRouters since 2014. The holder is precision milled for perfect alignment and repeatability.  The centring holes make setup for your joinery fast and accurate.  The V3 Template...