PantoRouter Accessories

This Mortise and Tenon Template Pack is a set of seven mortise and tenon templates. Five horizontal templates can make 1” (25.4mm), 1.5” (38.1mm), 2” (50.8mm), 2.5” (63.5mm) and 3” mortise and tenon. Two vertical...

The PantoRouter Auxiliary Fence has long slots to allow positioning on the table at any angle. Use the Auxiliary Fence combined with the tilting table on the PantoRouter to achieve compound angles in minutes. The T-Slot on the edge can be used for...

The Dowel Templates have the same outside taper as the PantoRouter Mortise and Tenon Template Pack so the same bit and guide bearing combinations can be used to make perfectly fitting round mortise and tenons, holes and dowels. Make your own dowels in...

The Centering Scale Fence allows the workpiece to be easily centered on the table. You simply measure the workpiece then set the width on the scale. The scale is only half the actual dimension so the piece is auto-centered without having to...

Designed and made for the PantoRouter, this solid carbide up-cut spiral cutter is a perfect partner to the Mafell FM1000 router spindle motor.  Precision made to make exact joints off the PantoRouter every time. Specification 8mm shank 8mm cutting...

For use with the PantoRouter, this dovetail cutter is a perfect partner to the Mafell FM1000 router spindle motor. Precision made to make exact joints off the PantoRouter every time. Specification 1/4" shank 12.7mm cutting diameter (1/2") 22.0mm cutting...

Box Joint template for PantoRouter is a box joint (finger joint) template used to make 6mm or 12mm wide fingers. Using the bearing guide follow the template to create precision joints every time. Accurate, Repeatable, Fast!

The Variable Spaced Dovetail template set of 5 is used to make 8° dovetail joints on the PantoRouter. The template is mounted on the V3 template holder with the supplied hardware. You will also need...PantoRouter Dovetail...