Sale

AUKTools' Solid Brass Inlay Kit includes a 1/8” downcut solid carbide spiral bit (1/4" Shank) for chip-free cutting, quick-change bushing, template guide and complete instructions. The router base required for fitting the guide bush must have a clear 30...

INCRA's Precision Marking Rule offers unparalleled accuracy, having patented marking holes to mark in rather than just etched graduations, these Rules allow you to mark out precisely with no risk of error. Just select the slot or hole, insert a 0.5mm...

Narex mortice chisels are accurate, hard and immensely tough. Used for material removal as well as cutting mortice joints. The sides taper in height and length from tip to shoulder resulting in excellent cutting performance. The blade is forged from...

NAREX cabinetmaker’s chisels have an improved cross-section from previous designs. The sides are ground thin to minimise friction when cutting which is particularly useful for dovetail work. The blade is forged from Chrome Manganese (Cr-Mn) steel and...

NAREX cabinetmaker’s chisels have an improved cross-section from previous designs. The sides are ground thin to minimise friction when cutting which is particularly useful for dovetail work. The blade is forged from Chrome Manganese (Cr-Mn) steel and...

The Armor Tool Mini Jig Pocket Hole System is a self-adjusting system that will set your drill guide and drill bit collar based off the thickness of the material, this is done easily with the integrated Mini Jig calipers. No more manual setting,...

Armor Tool Auto-Pro 14" (355mm) Dog Fence easily slide into dog holes and allow you to position and brace materials or set up corners. Dog Fences are reversible with a high side and a low side to accommodate variations in work thickness and length for...

The Armor Colour-Coat screws are the perfect fastener for any project. A colour-coded system differentiates screw length and matches it to the exact material thickness shown on the self-adjusting guide block, providing you the strongest pocket hole joint...

The Armor Colour-Coat screws are the perfect fastener for any project. A colour-coded system differentiates screw length and matches it to the exact material thickness shown on the self-adjusting guide block, providing you the strongest pocket hole joint...

Putting inlays into your project can bring your finished piece to a whole new creative level. Our AUKTools inlay templates are made of hardened 10mm transparent acrylic. Each template gives your router a stable, flat surface to run on, while your spiral...

Routing inlays into your project will bring your finished piece to a whole new creative level. Our AUKTools inlay templates are made of hardened 10mm transparent acrylic. Each template gives your router a stable, flat surface to run on.  Our...

The Armor Colour-Coat screws are the perfect fastener for any project. A colour-coded system differentiates screw length and matches it to the exact material thickness shown on the self-adjusting guide block, providing you the strongest pocket hole joint...

The Armor Tool Quick-Track is a 7/8″ t-track that uses mounted 5/16″ bolts which allows for greater pull force while clamping. The Quick-Track features convenient access points every 300mm (12″) so you can insert or remove quickly without having to move...

This Mortise and Tenon Template Pack is a set of seven mortise and tenon templates. Five horizontal templates can make 1” (25.4mm), 1.5” (38.1mm), 2” (50.8mm), 2.5” (63.5mm) and 3” mortise and tenon. Two vertical...

The Armor Tool Quick-Track is a 7/8″ t-track that uses mounted 5/16″ bolts which allows for greater pull force while clamping. The Quick-Track features convenient access points every 300mm (12″) so you can insert or remove quickly without having to move...