Veritas

Veritas Narrow Blade Clamp Head Only is available as an accessory for existing owners of the standard Veritas Mk II Honing Guide. It is interchangeable with the standard head in seconds. It securely...

Sometimes when plugging holes, no matter how carefully drilled, the holes finish up slightly oversize for the plug, especially in soft woods.  These cabinet maker's snug plug cutters overcome this...

Veritas Shaft Clamp for Dual Marking Gauge is used to lock the relative position of the two rods on the Veritas Dual Marking Gauge, when a project requires a constant mortice size, but different...

Wooden handle for Veritas Front and Tail Vices. Length of handle 310mm x 30mm diameter

The knife has an A2 tool-steel blade, ground to a point with a 25° bevel. It leaves a clearly incised line that serves to guide a saw or chisel when starting a cut, helping to improve accuracy...

Workshop accuracy begins with a benchmark straight edge as a surface reference. These precision steel straight edges are ground flat over the entire length on both edges, the 610 (24") length to...

The Veritas Crosscut Carcass Saw has great balance, cuts easily, stays true and has a comfortable and secure grip.  The saw measures 275mm (11") long by 0.5mm thick high-carbon steel blade filed for...

The Veritas fence, made of stainless steel and aluminium, can be positioned on either side of the plane and will work on both straight and curved pieces. In addition to using for dadoes or grooves,...

The Veritas Saddle Square eliminates the need to move your square when transferring a line from the face side of timber to face edge and vice versa. With this saddle square the line can be marked on...

This versatile bench top fittings comes in very handy for all sorts of jig and homemade clamping devices. Veritas Wonder Pups are basically bench dogs with a length of threaded bar through the top,...

This 75mm-wide router plane looks and works like its full-size counterpart; comfortable to hold and manoeuvre, it's ideal for hardware installation or fine inlay work. It comes with a 3.2mm wide...

The Veritas Low Angle Block Plane stands apart from all others; its 12 degree bed angle and low cutting angle of 37 degrees excel at working end grain. It has higher side-wings ideal for shooting,...

The Veritas Precision Square has the accuracy of an engineer's square (0.025mm per 25mm of length) with the 80mm leg in half millimetres and the 150mm leg in millimetres.  All four edges are ground,...

The Veritas Low Angle Jack Plane is an ideal plane for shooting mitres, working end grain and initial smoothing. Veritas have designated it as a 62-1/2 because of its generous size, greater weight,...

Replacement Inside cutter wheel for the Veritas Dual Marking Gauge.