If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Woodpeckers Iron Grip Clamp Upgrade improves on Woodpeckers ever-popular original Coping Sled and beefs it up with the Iron-Grip clamp which gives you two points of contact on the workpiece but only one clamping knob.
Woodpeckers have taken a 'belt and braces' approach to securing your work with the Iron-Grip Clamp Upgrade. The new Iron-Grip stainless spring steel clamp gives you two points of contact with only one knob to adjust.
The clamp slides effortlessly right or left to position the clamping pads right where you need them. Once adjusted to the thickness of your stock, it takes less than one full turn of the knob to release the stock and slide in the next piece. It's faster than a pair of toggle clamps and won't distort your sled the way toggle clamps may do. The Iron-Grip clamp holds stock up to 44mm (1-3/4") thick.
Woodpeckers
Woodpeckers Coping Sled is the router table accessory you need to make rail and style doors, tenons, lap joints and most other end grain cuts, and is the best way to ensure your board is...
Woodpeckers
Woodpeckers Iron-Grip Small Parts Holder enhances your safety and improves accuracy when routing small workpieces on your router table. The idea has been around for quite some time, but the build...
Woodpeckers
Woodpeckers Knuckle Clamp provides versatile gripping with no slipping and has 7 circular pivot points that provide a wide range of positions for the clamp's locking knob. These...
Woodpeckers
The Woodpeckers Box Clamp is a simple device that eliminates the hassle of using heavy, expensive bar clamps for assembling boxes, drawers and especially full size cabinets. Imagine being able...
Woodpeckers
The Woodpeckers Clamping Square and CSP Clamp Package combines two pairs of the Woodpeckers Clamping Squares PLUS with two packs of four Woodpeckers CSP Clamps The Woodpeckers CSP Clamps are more...
Woodpeckers
Notice that Woodpeckers Clamping Squares PLUS work either inside or outside the workpieces. Take a look at the inside corner, too. You’ll see a relief cut that won’t bind on your stock if something...
