Woodpeckers SteadyCurve Bandsaw Template Guide

Position SteadyCurve on your band saw table with the amount of blade offset you want, lock the MagSwitch clamps and you're ready to cut. Instead of trying to follow a traced-out line, just keep the pattern against the SteadyCurve as you move along the contour. Then trim the remaining fraction of an inch off with your router, faster and smoother than ever before because the depth of cut is minimized and consistent. SteadyCurve comes with replaceable template followers for 6.35mm (1/4") and 3.175mm (1/8") blades and works with any band saw with a cast iron or steel table and at least 12" of throat clearance.

Features

• MagSwitch clamps allow easy positioning and instant locking of the SteadyCurve on your table.
• Template follower adjusts vertically for material as thin as 1/4" and up to 4".
• Molded template followers won't damage blades and are easily replaced when worn.
• Works with all 300mm/12" and larger band saws, with or without table extension.
• Corrosion-resistant materials and finishes used throughout for a lifetime of service.

SteadyCurve works with nearly all types of templates, commercially made or shop made, plastic, MDF or plywood. Whatever attachment system you’re using for your router will work for SteadyCurve too. SteadyCurve makes every contoured project go faster and smoother, and your finished parts will be more accurate.