The Scary Sharpening abrasive sheets provide a quick cutting, long lasting and very flat sharpening method. These Aluminium Oxide microfinishing sheets are easy to lay with the Pressure Sensitive Adhesive (PSA) backing.   Each sheet is approximately...

Double-sided diamond bench stone with coarse and extra-fine grit. Precision ground substrate ground to +/- 0.0005" making it perfect for sharpening plane irons and chisels up to 50mm wide. Clearly marked grit sizes on the stone's surface for ease of use...

Ideal for holding Japanese waterstones, diamond plates and oil stones. The elevated working height makes sharpening easier providing chisel and knife handle clearance whilst keeping water and oil from contaminating your worktop. Features a high-quality...

With the SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also...

The Tormek KS-123 Knife Angle Setter is your key to achieving precise sharpening angles for any type of knife. Whether you’re working with straight blades or tapered ones, this patented and considered solution simplifies the angle setting process...

Japanese Waterstones are used to bring the metal to an absolute mirror finish, and hence an ultra-sharp edge. Whereas the coarser stones can be stored in water, these fine stones are harder and not so porous, so only need to be sprinkled with water just...

Japanese Waterstones are used to bring the metal to an absolute mirror finish, and hence an ultra-sharp edge. Whereas the coarser stones can be stored in water, these fine stones are harder and not so porous, so only need to be sprinkled with water just...

Nagura Japanese Waterstones are used for cleaning a glazed surface or creating a slurry prior to honing on finer stones, thereby speeding up the process. These artificial Nagura stones are the equivalent of the 8,000 gold stone and therefore there will...

The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool. The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone...

Japanese Waterstones are used to bring the metal to an absolute mirror finish, and hence an ultra-sharp edge. Whereas the coarser stones can be stored in water, these fine stones are harder and not so porous, so only need to be sprinkled with water just...

A cluster of genuine diamonds is mounted in a holder and used to dress or open the grindstone when the stone becomes grooved or glazed. It takes only a few seconds to set up and can really improve the performance of the wheel. Dual knob screw permits...

The Tormek T-4 incorporates new, innovative, patent pending features. Firstly, the zinc cast top incorporates the key components of the main shaft, Universal Support and motor assembly resulting in superb accuracy as standard. Secondly, the Universal...

Double-sided diamond bench stone ideal for site work and your workshop. The 180 grit side has unique clearance channels that clear away any swarf/residue following either sharpening or flattening oil and water stones. The 600 grit side is ideal for...

This little jig is designed for sharpening short woodcarving tools and the shortest chisels. Suitable for straight shanked tools, such as wood chisels, carving gouges and tools for power carvers. The jig has two parallel flanges running on both...

With the Tormek KJ-45 Centering Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting...