iGaging Digital Protractor and Rule with large LCD display which measures a full 360 degrees to a resolution of 0.05 with a 10" rule. The 10" blades have a 200mm and 8" rule on the front with 10" on the back blade. The pair of 27mm wide 1.25mm thick...

Woodpeckers Precision Triangle Set simultaneously serves as a square and a 45, all in one. A pocket-sized triangle is perfect for squaring from the inside of boxes and drawers during assembly. For decades, craftsmen have used squares to layout...

When marking accuracy is paramount, this marking knife from iGaging will cut a line finer than a sharp pencil for greater accuracy. The blade is 38mm long x 16mm wide with a 55° angle down to the point. It is flat on one side and bevelled on the...

The Veritas Dovetail Saddle Marker 1:8 is precisely machined tool with the traditional 1:8 angle.  Designed with long legs to ensure accurate registration on the workpiece.  The saddle enables you to mark a continuous line around a corner. Both straight...

Red Crayons refill for the FatBoy Pencil. Features 5 Red Crayons Please Note: Pencil NOT included

The Woodpeckers 6" Carpenters Square is a perfectly machined combination 90-degree and 45-degree with handles for a physical reference to the edge of the workpiece. The blade is machined from cast and ground aluminium tool plate. This expensive...

INCRA's Precision Marking Rule offers unparalleled accuracy, having patented marking holes to mark in rather than just etched graduations, these Rules allow you to mark out precisely with no risk of error. Just select the slot or hole, insert a 0.5mm...

Woodpeckers' Story Sticks are great for flawless, repeatable full-scale layout marking and measuring. Woodworkers and builders have relied on the story stick for centuries. The Woodpeckers Story Stick Pro 96" doubles the length of the previous model to 8...

The FastCap Mini Scribe makes it easy to maintain a consistent scribe in those tight and difficult areas, staying parallel to the object surface every time. The Turning-Cam allows you to adjust the measurement on either side of the Mini Scribe, the steps...

iGaging 3-in-1 Marking Gauge is a Digital Wheel Marking Gauge, Height Gauge and Depth Gauge all in one tool, does everything a traditional marking and cutting gauge gauge does but with a large LCD display, and being a digital gauge, it does it all with...

Woodpeckers Saw Gauge is a dial indicator and a tool that rides perfectly down the centre of the miter slot, creating the perfect saw cut by ensuring the saw blade and rip fence are dead parallel to the left hand miter gauge slot...

These marking gauges are being made exclusively for us by Joseph Marples of Sheffield. They are being made with a Shortened stem only 8mm above the marking pin, this enables them to be used inside boxes and tight areas where the standard 25mm would not...

The Woodpeckers Pocket T-Squares are milled from a single, solid billet of aluminium for uncompromising rigidity. A broad, precisely machined lip registers solidly along your reference edge. Both graduated edges are beveled to minimise parallax viewing...

Framing Squares Just Don’t Cut It. Conventional framing squares may be OK for construction jobs where 'square' means in the neighbourhood of 90°. That’s what you can expect from a square that’s punched out by the thousands or...

These digital readout kits (DRO) can be adapted to any number of woodworking and metalworking machines such as router lifts, spindle moulders, planers, table saws or milling machines, metal lathes etc., allowing conversion to digital readout thus...