JessEm Clear Cut Stock Guides for Table Saws

These dual-action Clear Cut stock guides are a simple solution to improving the consistency and safety of your table saw work, replacing up to 4 conventional feather boards and featuring a super-fast set-up.

Features

• 5º angled wheels simultaneously pull timber toward the fence while holding it down.
• Hold-in + Hold-down feature improves consistency on long boards and wide panels.
• One-way roller bearings in the wheels prevent kickback.
• Heavy aluminium and stainless steel construction with non-marring urethane tyres on each wheel

If you've been using feather boards on your table surface , they're no longer required; because the wheels are set at a 5º angle to the fence, causing boards to be simultaneously pushed against the fence as you feed them forward. This really simplifies sawing long boards, and there's no need to readjust for different board widths as with feather boards. This hold-in action also works on wide panels where feather boards can't be used. They also work like a dream on boards that aren't parallel or are varying widths.

To prevent kickback, the wheels feature one-way roller bearings that allow the wheels to turn forward when feeding timber but not turn in the reverse direction. Each wheel has twin urethane tyres that grip your work without marking or scratching.

The set up is really fast - the outer knob serves as a pivot, and the inner knob sets the height of the wheels. Just drop the wheel onto the top of your board, add the desired amount of downward pressure, and tighten the knob.

If you like hefty tools, you'll love the Clear Cut Stock Guides. The bodies and wheel carriers are machined from solid aluminium, and the generously-sized knobs are stainless steel. The precision machined acetol resin wheels run on hardened steel hubs and roller bearings for a lifetime of use.

Includes

• 2x Stock Guides Assemblies
• 1x 762mm (30") Track
• 1x Harware Fixings Pack and Torx Driver