Routing

Easily replace your GRR-RIPPER leg with our 1/4" replacement piece. This is perfect when you get a little too close the blade and trim your leg. Rest assured that it's an easy fix. The 1/4" Leg attaches directly to the main body using your existing...

The Centering Scale Fence allows the workpiece to be easily centered on the table. You simply measure the workpiece then set the width on the scale. The scale is only half the actual dimension so the piece is auto-centered without having to...

The PantoRouter Dust Collection Hood enhances the operation and user experience of the PantoRouter. It installs with the supplied hardware in just a few minutes and is compatible with all Hybrid PantoRouters. The brush head moves to create a collar...

The PantoRouter Fence Stops are the perfect addition for positioning your workpiece on the machined table top. Just slide the oval nut into the tracks and tighten the lever.

Designed and made for the PantoRouter, this solid carbide up-cut spiral cutter is a perfect partner to the Mafell FM1000 router spindle motor.  Precision made to make exact joints off the PantoRouter every time. Specification 8mm shank 8mm cutting...

For use with the PantoRouter, this dovetail cutter is a perfect partner to the Mafell FM1000 router spindle motor. Precision made to make exact joints off the PantoRouter every time. Specification 1/4" shank 12.7mm cutting diameter (1/2") 22.0mm cutting...

The growing popularity in the live edge slab table top that feature winding grains, eye-catching burls and even epoxy inlays offer some major challenges in the workshop. Overall width and tricky grain changes make the use of a jointer and thickness...

UltraFLEX Feathers are less rigid than Standard Feathers, giving a lighter pressure without the loss of safety. This is achieved by a thinner neck on the feather hinge. The material is the same, only a lighter colour to visually distinguish it from the...

INCRA I-Box Jig Spare Miter Guide for running the iBox in two miter slots - where available.

Upgrade your JessEm lift with JessEm's new Aluminium Insert Wrench made of anodised aluminium and stainless steel for durability and strength. This new design is an ergonomically designed and easy way to remove insert rings. It looks nice and works even...

Musclechuck's Quick Change Chuck allows you to change your router cutters one handed, with ease and speed from above the router table or on your CNC machines. The chucks locking system uses just one hex wrench which leaves the other hand free to hold the...

The Dowel Templates have the same outside taper as the PantoRouter Mortise and Tenon Template Pack so the same bit and guide bearing combinations can be used to make perfectly fitting round mortise and tenons, holes and dowels. Make your own dowels in...

The FlipBolt is the ultimate tool-less countertop connector. Use this FlipBolt Jig to route the perfect shape for your connectors. After routing, place the connector in the slot and finger to tighten it, then flip the arm down to lock it...

INCRA MagnaLOCK™ router plates are made from precision-machined, aircraft-grade aluminium with an anodised coating to achieve the perfect cutting results. High-energy, rare-earth magnets hold the MagnaLOCK rings secure and perfectly flush every...

JessEm's flagship Mast-R-Lift Excel II router system has a solid phenolic table top, with a built-in metric lift and sidewinder handle. The ultimate in quality router systems for the discerning customer looking for excellent durability...